Hydrodynamic cavitation for scalable exfoliation of few-layered graphene nanosheets
- 20 September 2021
- journal article
- research article
- Published by IOP Publishing in Nanotechnology
- Vol. 32 (50) , 505701
Abstract
A scalable manufacturing method for the production of biocompatible fewlayered graphene nanosheets is developed using hydrodynamic cavitation. Scalable exfoliation is induced by employing hydrodynamic cavitation and a serum albumin protein. Unlike acoustic cavitation, the primary means of bubble collapse in hydrodynamic cavitation is caused laterally, thereby separating two adjacent flakes through a shear effect. In this process, bovine serum albumin, a known protein, was employed to act as an effective exfoliation agent and provide desired stability by preventing restacking of the graphene layers. This method was used to study the effect of time of graphene exfoliation in a novel hydrodynamic cavitation system. The fabricated products were characterized using Raman spectroscopy, Transmission electron microscopy, Fourier transform infrared spectroscopy and differential scanning calorimetry. The results showed that with increasing the time of exfoliation, the number of graphene layers decreased based on theI2D/IGratio but disorder increased based on theID/IGratio. At 3 h, theI2D/IGratio was at 0.39 and theID/IGratio was 0.25, while at 6 h theI2D/IGratio was 0.35 andID/IGratio was 0.29. The results of the theoretical and computational analysis this research outlines are needed to obtain an effective cavitation model that can be used to potentially improve graphene synthesis and quality. The captured images of bubble propagation in the solution imply that this fluidic phenomenon could assist the graphene exfoliation. To prove this, a simple cavitation model using a needle valve was designed. The needle valve cavitation setup was able to identify that cavitation assists in graphene exfoliation and this was proved using the graphene characterization data. Based on these findings, the simulation models were designed in ANSYS and COMSOL. Specifically, through the ANSYS simulation, we were able to calculate cavitation numbers for specific flow rates and fluid temperatures.Keywords
Funding Information
- Office of Naval Research (N000141712620)
- National Science Foundation (2014346)
This publication has 29 references indexed in Scilit:
- Three-Dimensional Paper-Based Microfluidic Device for Assays of Protein and Glucose in UrineAnalytical Chemistry, 2013
- Graphene synthesis: relationship to applicationsNanoscale, 2012
- Preparation of Graphene by Using an Intense Cavitation Field in a Pressurized Ultrasonic ReactorChemistry – A European Journal, 2012
- The surface science of graphene: Metal interfaces, CVD synthesis, nanoribbons, chemical modifications, and defectsSurface Science Reports, 2012
- Preparation of graphene by jet cavitationNanotechnology, 2011
- Graphene Based Electrochemical Sensors and Biosensors: A ReviewElectroanalysis, 2010
- HDAC inhibitor trichostatin A-inhibited survival of dopaminergic neuronal cellsNeuroscience Letters, 2009
- High-yield production of graphene by liquid-phase exfoliation of graphiteNature Nanotechnology, 2008
- Two-dimensional electron and hole gases at the surface of graphitePhysical Review B, 2005
- Ultrasound in synthetic organic chemistryChemical Society Reviews, 1997