Impact on mechanical and thermal characteristics of epoxy nanocomposites by waste derived carbon nanotubes, carbon black, and hybrid CNT/FCB reinforcing materials
Authors:
- 22 May 2024
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 45 (13) , 11701-11713
Abstract
In this present investigation, epoxy nanocomposites were formulated with multiwalled carbon nanotubes derived from plastic (p‐MWCNTs), carbon black from tires (t‐CB), and a combination of p‐MWCNTs and functionalized carbon black (FCB). A comparative analysis was conducted between the properties of the original composites and epoxy nanocomposites containing a mixture of carbon nanotube (CNT) and FCB. Morphology, carbon content, and oxide content of CB and FCB were assessed using field emission scanning electron microscopy (FESEM) and energy‐dispersive x‐ray spectroscopy (EDS or EDX). The dispersion of CNT and the CNT/FCB blend in water was observed using ultraviolet–visible spectroscopy (UV–VIS). Furthermore, Fourier transform infrared spectroscopy and x‐ray diffraction analyses were performed on CNT, CB, and FCB to comprehend the presence of functional groups and structural changes with chemical treatment. The nanocomposites were created by employing diglycidyl ether of bisphenol A (DGBEA) epoxy resin through a simple sonication and casting method. The tensile strength of CNT/FCB epoxy composites showed a significant increase, rising from 66.26 MPa to 158.48 MPa, marking a 139.17% improvement over pure epoxy. This improvement is likely due to the bonding interaction between the epoxy, FCB, and CNTs which resulted a uniform dispersion of fillers onto epoxy matrix. Conversely, the impact strength initially increased from 112.84 J/m (pure epoxy) to 144.05 J/m (FCB), but then decreased to 115.7 J/m for CNT/FCB composites. FCB demonstrated a 27.65% increase in impact strength compared to pure epoxy. Moreover, the thermal stability of the samples exhibited improvement from neat epoxy to CNT/FCB‐based nanocomposites.Highlights: Oxygen content of CB increased from 25.17% to 54.60%. CNT/FCB epoxy composites exhibited a 139.17% increase in tensile strength. FCB epoxy composites shows 27.65% increase in impact strength. Thermal stability of CNT/FCB composites increased by 1.89%. Crosslinking via covalent bonding occurred between FCB and epoxy.Keywords
This publication has 30 references indexed in Scilit:
- Additive manufacturing in the aerospace and automotive industries: Recent trends and role in achieving sustainable development goalsAin Shams Engineering Journal, 2023
- Mono‐filler and bi‐filler composites based on thermoplastic polyurethane, carbon fibers and carbon nanotubes with improved physicomechanical and engineering propertiesPolymer International, 2021
- Hybridization as an efficient strategy for enhancing the performance of polymer nanocompositesPolymer Composites, 2021
- Epoxy/Fly ash from Indian soil Chulha/nano CaCO3 nanocomposite: Studies on mechanical and thermal propertiesPolymer Composites, 2020
- Carbon nanotubes-polymer nanocomposite membranes for pervaporation2020
- High‐performance thermoplastic polyurethane nanocomposites induced by hybrid application of functionalized graphene and carbon nanotubesJournal of Applied Polymer Science, 2019
- Processing of mixed-plastic waste to fuel oil, carbon nanotubes and hydrogen using multi–core reactorChemical Engineering and Processing - Process Intensification, 2017
- Silane modification of carbon nanotubes and its effects on the material properties of carbon/CNT/epoxy three-phase compositesComposites Part A: Applied Science and Manufacturing, 2011
- Carbon nanotube/epoxy composites fabricated by resin transfer moldingCarbon, 2010
- Effects of surface modification on rheological and mechanical properties of CNT/epoxy compositesCarbon, 2006