Local Stress Field Correction Method Based on a Genetic Algorithm and a BP Neural Network for In Situ Stress Field Inversion
Open Access
- 1 January 2021
- journal article
- research article
- Published by Wiley in Advances in Civil Engineering
- Vol. 2021 (1)
Abstract
The in situ stress field is the fundamental factor causing deformation and damage in geotechnical engineering, so it is the main basis for underground engineering design and excavation. However, it is difficult to accurately obtain the in situ stress through most existing inversion methods in areas with complex geological conditions. For the problem of a relatively discrete and nonlinear relationship of measured stress in the Yebatan Hydropower Station area, a new in situ stress inversion method called the local stress field correction (LSFC) method combining a genetic algorithm (GA), backpropagation (BP) neural network, and submodel method is proposed. The inverted in situ stress results produced by this method show that the distribution of in situ stress is greatly influenced by tectonic movements in the Yebatan area, there is no obvious linear relationship with depth, and the stress release phenomenon occurs at the faults. By comparison with the multiple regression method, it is found that the method still has high inversion accuracy under complex geological conditions, and the average relative error of LSFC inversion results is 17.05%, which is much lower than the value of 43.58% via the multiple regression method. Therefore, the LSFC method can be used for the inversion of in situ stress in complex geological regions and provide a reference for engineering design and construction.Keywords
Funding Information
- National Natural Science Foundation of China (U1965203)
This publication has 22 references indexed in Scilit:
- mountainous2014
- In situ stress field inversion and its application in mining-induced rock mass movementInternational Journal of Rock Mechanics and Mining Sciences, 2012
- Estimation of in situ stress along deep tunnels buried in complex geological conditionsInternational Journal of Rock Mechanics and Mining Sciences, 2012
- Analysis of 3D In-situ Stress Field and Query System's Development Based on Visual BP Neural NetworkProcedia Earth and Planetary Science, 2012
- In-situ stress measurements and stress distribution characteristics in underground coal mines in ChinaEngineering Geology, 2010
- A displacement-based back-analysis method for rock mass modulus and horizontal in situ stress in tunneling – Illustrated with a case studyTunnelling and Underground Space Technology, 2006
- Stress measurements in deep boreholes using the Borre (SSPB) probeInternational Journal of Rock Mechanics and Mining Sciences, 2003
- Analysis of stress measurements using a numerical model methodologyInternational Journal of Rock Mechanics and Mining Sciences, 2001
- Estimating mechanical rock mass parameters relating to the Three Gorges Project permanent shiplock using an intelligent displacement back analysis methodInternational Journal of Rock Mechanics and Mining Sciences, 2000
- Boundary element analysis methods for ground stress field of rock massesComputers and Geotechnics, 1986