Removal of Fluoride by Graphene Oxide/Alumina Nanocomposite: Adsorbent Preparation, Characterization, Adsorption Performance and Mechanisms
- 10 February 2020
- journal article
- research article
- Published by Wiley in ChemistrySelect
- Vol. 5 (6) , 1818-1828
Abstract
GO/Al 2 O 3 was successfully prepared by using hydrothermal method which was used to study the removing of fluoride from water. The characterization results of X‐ray diffraction (XRD), transmission electron microscope (TEM) and Fourier transform infrared (FT‐IR) spectra indicated that γ‐Al 2 O 3 had been modified onto GO nanosheets. The BET surface area of GO/Al 2 O 3 is 326.22 m 2 g −1 and the corresponding pore size center at 3.7 nm. A batch of fluoride adsorption experiments were employed to investigate the effects of various factors such as solution pH values, contact time, fluoride initial concentrations, temperature, adsorbent dose, co‐existing anions, and recycling on fluoride removal. The results showed that the adsorption capacity (4.68 mg g ‐1 ) of GO/Al 2 O 3 is higher than that of γ‐Al 2 O 3 (3.04 mg g −1 ). In addition, the modified adsorbent had a wide range of pH applications. Adsorption kinetics is well represented by the pseudo‐second‐order model, which indicating the adsorption processes are involved in chemisorption with ion exchange. The influences of co‐existing anions on fluoride removal followed the decreasing order of PO 4 3‐ >HCO 3 ‐ >SO 4 2‐ >Cl ‐ >NO 3 ‐ , which was related to the charge and radius of ions. The recycle performance of GO/Al 2 O 3 is not so good owing to the poor strength of GO during the cycle process. Fluoride adsorption onto GO/Al 2 O 3 could be attributed to electrostatic attraction, ligand exchange, ion exchange and hydrogen‐bond interaction between fluoride and OH groups.Keywords
Funding Information
- National Nature Science Foundation of China (U1607105)
- Natural Science Foundation in Qinghai Province (2018-ZJ-928Q)
- Scientific and Technological Funding in Qinghai Province (2018-GX-101)
This publication has 30 references indexed in Scilit:
- Controllable synthesis of mesoporous alumina with large surface area for high and fast fluoride removalCeramics International, 2016
- Preparation and characterization of low fouling novel hybrid ultrafiltration membranes based on the blends of GO−TiO2 nanocomposite and polysulfone for humic acid removalJournal of Membrane Science, 2016
- Template-free synthesis of mesoporous γ-alumina with tunable structural propertiesCeramics International, 2016
- Enhanced fluoride removal from water by sulfate-doped hydroxyapatite hierarchical hollow microspheresChemical Engineering Journal, 2016
- Efficient removal of fluoride by hierarchical Ce–Fe bimetal oxides adsorbent: Thermodynamics, kinetics and mechanismChemical Engineering Journal, 2016
- Fluoride removal from aqueous solution by Al(III)–Zr(IV) binary oxide adsorbentApplied Surface Science, 2015
- Research on removal of fluoride in aqueous solution by alumina-modified expanded graphite compositeJournal of Alloys and Compounds, 2015
- Modeling isotherms, kinetics and understanding the mechanism of phosphate adsorption onto a solid waste: Ground burnt pattiesJournal of Environmental Chemical Engineering, 2014
- Performance of an optimized Zr-based nanoparticle-embedded PSF blend hollow fiber membrane in treatment of fluoride contaminated waterWater Research, 2014
- Effect of structure-directing agents on facile hydrothermal preparation of hierarchical γ-Al2O3 and their adsorption performance toward Cr(VI) and CO2Journal of Colloid and Interface Science, 2013