The synergistic effect of bulk-surface modification onto the wear resistance of the ultrahigh molecular weight polyethylene
Authors:
Open Access
- 24 January 2023
- journal article
- research article
- Published by SAGE Publications in Polymers and Polymer Composites
- Vol. 31
Abstract
The paper investigates the effect of bulk and surface modification on the adhesive and tribological properties of ultra-high molecular weight polyethylene (UHMWPE) and shows that bulk modification with nano- and micro-sized modifiers (montmorillonite, shungite, exfoliated graphite) mainly reduces the friction coefficient but leads to a decrease in the wear resistance of the corresponding composites. It is found that gas-phase surface fluorination provides an increase in the wear resistance of experimental samples in all cases due to a combination of nanotexturing and chemomorphological transformations of the surface layers of the modified polymers. The significant dependence of the nanotexture on the technique and mode of modification is demonstrated using the original approaches to the quantitative characterization of the experimental samples’ surfaces’ scanning electron microscopy-images (formed with the scanning electron microscope). It is shown that the surface fluorination not only makes possible to significantly compensate for the increase of the friction coefficient of bulk-modified UHMWPE in comparison with the original one but also provides a nonlinear multiplicative increase in the wear resistance.Keywords
Funding Information
- Moscow Polytechnic University (Grant named after V.E.Fortov)
This publication has 48 references indexed in Scilit:
- Structure and properties of ultra-high molecular weight polyethylene filled with disperse hydroxyapatiteInorganic Materials: Applied Research, 2012
- Modification of ultra‐high‐molecular weight polyethylene by various fluorinating routesJournal of Polymer Science Part A: Polymer Chemistry, 2011
- Polymer membranes for fuel cells: manufacture, structure, modification, propertiesRussian Chemical Reviews, 2010
- Surface modification of polymers by direct fluorination: A convenient approach to improve commercial properties of polymeric articlesPure and Applied Chemistry, 2009
- Surface characterization of plasma‐modified polyethylene by contact angle experiments and ATR‐FTIR spectroscopySurface and Interface Analysis, 2007
- Structural and mechanical properties of polymer nanocompositesMaterials Science and Engineering: R: Reports, 2006
- Mechanical Reinforcement of Polymers Using Carbon NanotubesAdvanced Materials, 2006
- Multiple surface structures in polyolefins formed by modification methodsJournal of Applied Polymer Science, 2005
- Influence of nanomorphology on the photovoltaic action of polymer–fullerene compositesNanotechnology, 2004
- Reversible Tuning of Wetting Behavior of Polymer Surface with Responsive Polymer BrushesLangmuir, 2003