A Cascaded Gate Driver Architecture to Increase the Switching Speed of Power Devices in Series Connection
- 2 July 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 9 (2) , 2285-2294
Abstract
This paper presents a cascaded gate driver architecture to improve the switching speed of series-connected power devices. The main idea is to propose a new technique to increase the dV=dt of the devices when their voltages are already balanced. In complex power converters like multi-cell and multi-level topologies, and series-connected power devices, many driver circuits are required and implemented. In such converters, there are several dV=dt sources generated at different floating points associated to the parasitic capacitances of the isolated barriers of the gate drivers (supplies and control signal isolation units), which can amplify the conducted electromagnetic interference (EMI) perturbations and therefore the switching speed of the power devices can be affected. This paper is focused on the analysis of a new cascaded configuration of gate drivers to increase the switching speed, and consequently reducing the switching losses of the series-connected transistor topologies. This improvement is achieved by reducing the equivalent parasitic capacitance of the gate driver circuitry considering the gate driver architectures: a new concept of Cascaded Gate Driver is presented. Theoretical and experimental measurements are used to support the Cascade Gate Driver Architecture proposed in this paper.Keywords
This publication has 24 references indexed in Scilit:
- Parasitic Inductance and Capacitance-Assisted Active Gate Driving Technique to Minimize Switching Loss of SiC MOSFETIEEE Transactions on Industrial Electronics, 2017
- Model-Based Dead Time Optimization for Voltage-Source Converters Utilizing Silicon Carbide SemiconductorsIEEE Transactions on Power Electronics, 2016
- Characterization and Analysis of an Innovative Gate Driver and Power Supplies Architecture for HF Power Devices With High dv/dtIEEE Transactions on Power Electronics, 2016
- A Test Environment for Power Semiconductor Devices Using a Gate-Boosting CircuitIEEE Transactions on Plasma Science, 2016
- Monolithic integrated quasi-normally-off gate driver and 600 V GaN-on-Si HEMT2015
- Series-Connected HV-IGBTs Using Active Voltage Balancing Control With Status Feedback CircuitIEEE Transactions on Power Electronics, 2014
- Series Connection of Insulated Gate Bipolar Transistors (IGBTs)IEEE Transactions on Power Electronics, 2011
- High-Voltage Auxiliary Power Supply Using Series-Connected MOSFETs and Floating Self-Driving TechniqueIEEE Transactions on Industrial Electronics, 2009
- Snubberless voltage sharing of series-connected insulated-gate devices by a novel gate control strategyIEEE Transactions on Power Electronics, 2001
- Optimum semiconductors for high-power electronicsIEEE Transactions on Electron Devices, 1989