Pressureless Sintering of Zirconium Diboride Using Boron Carbide and Carbon Additions
- 6 September 2007
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 90 (11) , 3660-3663
Abstract
The synergistic roles of boron carbide and carbon additions in the enhanced densification of zirconium diboride (ZrB 2 ) by pressureless sintering have been studied. ZrB 2 was sintered to >99% relative density at 1900°C. The combination of 2 wt% boron carbide and 1 wt% carbon promoted densification by removing surface oxide impurities (ZrO 2 and B 2 O 3 ) and inhibiting grain growth. Four‐point bending strength (473±43 MPa), Vickers' microhardness (19.6±0.4 GPa), fracture toughness (3.5±0.6 MPa·m 1/2 ), and Young's modulus (507 GPa) were measured. Thermal gravimetry showed that the combination of additives did not have an adverse effect on the oxidation behavior.Keywords
This publication has 17 references indexed in Scilit:
- Pressureless sintering of carbon-coated zirconium diboride powdersMaterials Science and Engineering: A, 2007
- Refractory Diborides of Zirconium and HafniumJournal of the American Ceramic Society, 2007
- Pressureless Densification of Zirconium Diboride with Boron Carbide AdditionsJournal of the American Ceramic Society, 2006
- Pressureless Sintering of Zirconium DiborideJournal of the American Ceramic Society, 2005
- Advances in microstructure and mechanical properties of zirconium diboride based ceramicsMaterials Science and Engineering: A, 2003
- Temperature dependence of thermal expansion and elastic constants of single crystals of ZrB2 and the suitability of ZrB2 as a substrate for GaN filmJournal of Applied Physics, 2003
- High temperature microhardness of ZrB2single crystalsJournal of Physics D: Applied Physics, 2002
- Effect of Oxygen Contamination on Densification of TiB 2Journal of the American Ceramic Society, 1987
- A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack MeasurementsJournal of the American Ceramic Society, 1981
- Metallic Borides: Preparation of Solid Bodies — Sintering Methods and Properties of Solid Bodies1977