Role of Impurities and PSBs on Microcracking of Polycrystalline Copper at Very High Numbers of Cycles
- 20 January 2011
- journal article
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 465, 29-34
Abstract
Fatigue cracks in polycrystalline copper may originate from PSBs or grain boundaries. They usually form at the specimen surfaces, but also internal small stage I (shear) cracks have been observed with the ECC/SEM technique. They are formed together with a strongly elongated dislocation cell structure, which is reflecting in many cases localized deformation in “slip lamellae” with eventual ladder-like features, being typical of PSBs. Both, PSBs and small non-propagating cracks are initiated at cyclic stress/plastic strain amplitudes below the conventionally reported PSB threshold values, if the number of cycles exceeds a minimum, e.g. approximately 5x108 in the VHCF range. The internal small cracks are formed not only in polycrystalline electrolytic copper of 99.98% purity but also in high purity (99.999%) material.Keywords
This publication has 6 references indexed in Scilit:
- Fatigue damage in copper polycrystals subjected to ultrahigh-cycle fatigue below the PSB thresholdInternational Journal of Fatigue, 2010
- On the life‐controlling microstructural fatigue mechanisms in ductile metals and alloys in the gigacycle regimeFatigue & Fracture of Engineering Materials & Structures, 1999
- Crack Nucleation in Persistent Slipbands1988
- Crack initiation mechanisms in copper polycrystals cycled under constant strain amplitudes and in step testsMaterials Science and Engineering, 1983
- Fatigue Crack Initiation by Cyclic Slip Irreversibilities in High-Cycle Fatigue1983
- A model of extrusions and intrusions in fatigued metals I. Point-defect production and the growth of extrusionsPhilosophical Magazine A, 1981