Processor-in-the-Loop validation of direct power control based on fractional-order modified super-twisting algorithm for doubly-fed induction generators
Authors:
Open Access
- 2 July 2025
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-29
Abstract
The Super-Twisting Control (STC) is a prominent nonlinear control method that operates independently of the mathematical model of the wind energy conversion system. This method is often considered a viable option because of its exceptional performance and reliability. Nonetheless, it presents specific constraints, including the requirement for numerous gain parameters and susceptibility to system failures. A more refined solution, termed “Fractional-Order Modified STC” (FOMSTC), is proposed to address these issues. This technique is notable for its straightforwardness, minimal gain parameters, ease of implementation, compatibility with embedded systems, and economic efficiency. The MSTC methodology was implemented in the Direct Power Control (DPC) of a Doubly Fed Induction Generator (DFIG), with the controller calculating the reference voltage values for the inverter of the machine. Alongside FOMSTC, Pulse Width Modulation (PWM) was employed to regulate the operation of the inverter. The proposed FOMSTC strategy exhibits simplicity, minimal gain requirements, straightforward implementation in embedded systems, and rapid dynamic response, positioning it as an effective control method. This methodology was utilized in the research to enhance energy quality and reduce the Total Harmonic Distortion (THD) of the system’s output currents, all while limiting DFIG power overshoot. The innovative strategy underwent validation via simulation and was subsequently confirmed through Processor-in-the-Loop (PIL) testing to assess its performance in real-time embedded systems. The results were analyzed in relation to traditional control strategies and contemporary research findings. The DPC-FOMSTC strategy showed notable decreases in ripples, overshoot, and steady-state error (SSE) for active power (Ps) by around 78.85%, 69.05%, and 36.84%, respectively, when compared to the conventional DPC method. In a comparable analysis, reductions of 70.90%, 52.63%, and 63.46% were observed in SSE, overshoot, and reactive power (Qs) ripple, respectively, when contrasted with the conventional DPC method.Keywords
This publication has 52 references indexed in Scilit:
- Design and Simulation of an Intelligent Grid-Connected MPPT Inverter with Battery Storage Using ANN Algorithm2024
- A new scheme of the fractional-order super twisting algorithm for asynchronous generator-based wind turbineEnergy Reports, 2023
- Robust Control of a Wind Conversion System Based on a Doubly Fed Induction Generator: A Comparison Between Adaptive Backstepping and Integral Sliding Mode Controllers2022
- Modified Super Twisting algorithm based sliding mode control for LVRT enhancement of DFIG driven wind systemEnergy Reports, 2022
- Enhanced control technique for a sensor-less wind driven doubly fed induction generator for energy conversion purposeEnergy Reports, 2021
- Integral sliding mode control for DFIG based WECS with MPPT based on artificial neural network under a real wind profileEnergy Reports, 2021
- Evaluation of Adaptive Backstepping Control Applied to DFIG Wind System Used on the Real Wind Profile of the Dakhla-Morocco City2021
- Stability analysis and study between classical sliding mode control (SMC) and super twisting algorithm (STA) for doubly fed induction generator (DFIG) under wind turbineEnergy, 2021
- Stability enhancement of induction generator–based series compensated wind power plants by alleviating subsynchronous torsional oscillations using BFOA‐optimal controller tuned STATCOMWind Energy, 2020
- Optimisation of photovoltaic–diesel–battery stand-alone systems minimising system weightEnergy Conversion and Management, 2016