Numerical and experimental analysis of the notch effect on fatigue behavior of polymethylmethacrylate metal based on strain energy density method and the extended finite element method
Open Access
- 1 August 2023
- journal article
- research article
- Published by Walter de Gruyter GmbH in Materials Science-Poland
- Vol. 41 (2) , 401-413
Abstract
This work investigates the effect of the notch on fatigue behavior by combining two methods: the extended finite element method (XFEM) and the averaged strain energy density (ASED) method, which considers the combined action of bending and shear loading. The ASED method has already been proven accurate for assessing the failure of components in the presence of sharp and blunt notches, and several results are available in the literature for different materials. These results were compared with those obtained from the experimental tests reported here. The main purpose of this study was twofold: The first part is an experimental study of fatigue in rotary bending of specimens weakened by U and V notches made of polymethyl-methacrylate (PMMA) material. Two values for the radius were used for the U-notches (0.2 and 2 mm) and two angles for the V-notches (20° and 140°). The second part of the study consisted of performing several simulation tests using the Cast3m software for different angles and radii. The local approach based on the mean value of the ASED acted over a finite-sized volume surrounding the highly stressed regions. The maximum principal stress located at the notch edge defined the center of the control volume. IfKeywords
This publication has 39 references indexed in Scilit:
- On mixed mode crack initiation and direction in shafts: Strain energy density factor and maximum tangential stress criteriaEngineering Fracture Mechanics, 2013
- Mixed mode brittle fracture of sharp and blunt V-notches in polycrystalline graphiteCarbon, 2011
- A review of the volume-based strain energy density approach applied to V-notches and welded structuresTheoretical and Applied Fracture Mechanics, 2009
- The volume-based Strain Energy Density approach applied to static and fatigue strength assessments of notched and welded structuresProcedia Engineering, 2009
- Local strain energy density and fatigue strength of welded joints under uniaxial and multiaxial loadingEngineering Fracture Mechanics, 2008
- A unified approach to the evaluation of linear elastic stress fields in the neighborhood of cracks and notchesInternational Journal of Fracture, 1996
- Prediction of non propagating cracksEngineering Fracture Mechanics, 1979
- A fracture criterion for three-dimensional crack problemsEngineering Fracture Mechanics, 1974
- Strain-energy-density factor applied to mixed mode crack problemsInternational Journal of Fracture, 1974
- Fracture mechanics applied to engineering problems-strain energy density fracture criterionEngineering Fracture Mechanics, 1974