An Elucidative Review of the Nanomaterial Effect on the Durability and Calcium-Silicate-Hydrate (C-S-H) Gel Development of Concrete
Top Cited Papers
Open Access
Abstract
Concrete as a building material is susceptible to degradation by environmental threats such as thermal diffusion, acid and sulphate infiltration, and chloride penetration. Hence, the inclusion of nanomaterials in concrete has a positive effect in terms of promoting its mechanical strength and durability performance, as well as resulting in energy savings due to reduced cement consumption in concrete production. This review article discussed the novel advances in research regarding C-S-H gel promotion and concrete durability improvement using nanomaterials. Basically, this review deals with topics relevant to the influence of nanomaterials on concrete’s resistance to heat, acid, sulphate, chlorides, and wear deterioration, as well as the impact on concrete microstructure and chemical bonding. The significance of this review is a critical discussion on the cementation mechanism of nanoparticles in enhancing durability properties owing to their nanofiller effect, pozzolanic reactivity, and nucleation effect. The utilization of nanoparticles enhanced the hydrolysis of cement, leading to a rise in the production of C-S-H gel. Consequently, this improvement in concrete microstructure led to a reduction in the number of capillary pores and pore connectivity, thereby improving the concrete’s water resistance. Microstructural and chemical evidence obtained using SEM and XRD indicated that nanomaterials facilitated the formation of cement gel either by reacting pozzolanically with portlandite to generate more C-S-H gel or by functioning as nucleation sites. Due to an increased rate of C-S-H gel formation, concrete enhanced with nanoparticles exhibited greater durability against heat damage, external attack by acids and sulphates, chloride diffusion, and surface abrasion. The durability improvement following nanomaterial incorporation into concrete can be summarised as enhanced residual mechanical strength, reduced concrete mass loss, reduced diffusion coefficients for thermal and chloride, improved performance against sulphates and acid attack, and increased surface resistance to abrasion.Keywords
Funding Information
- Ministry of Higher Education, Malaysia (FRGS/1/2022/TK01/UNITEN/02/1, J510050002—IC-6 BOLDREFRESH2025—CENTRE OF EXCELLENCE)
- UNIVERSITI TENAGA NASIONAL through the Internal Research Grant OPEX (FRGS/1/2022/TK01/UNITEN/02/1, J510050002—IC-6 BOLDREFRESH2025—CENTRE OF EXCELLENCE)
This publication has 122 references indexed in Scilit:
- The effects of nanoscale expansive agents on the mechanical properties of non-shrink cement-based composites: The influence of nano-MgO additionComposites Part B: Engineering, 2013
- Application of Nano Silica in Concrete for Enhanced Resistance against Sulfate AttackAdvanced Materials Research, 2013
- The effects of ZrO2 nanoparticles on physical and mechanical properties of high strength self compacting concreteMaterials Research, 2010
- Correlation between compressive strength and certain durability indices of plain and blended cement concretesCement and Concrete Composites, 2009
- High-Temperature CaO Hydration/Ca(OH)2 Decomposition over a Multitude of CyclesEnergy & Fuels, 2009
- Chemical degradation of concrete2007
- Abrasion resistance of concrete containing nano-particles for pavementWear, 2006
- How do polypropylene fibers improve the spalling behavior of in-situ concrete?Cement and Concrete Research, 2006
- An investigation on the wear resistance of high strength concretesWear, 2006
- Effect of temperature on structural quality of the cement paste and high-strength concrete with silica fumeNuclear Engineering and Design, 2005