Optimization of reaction parameters in hydrothermal synthesis: a strategy towards the formation of CuS hexagonal plates
Open Access
- 10 April 2013
- journal article
- Published by Springer Nature in BMC Chemistry
- Vol. 7 (1) , 67
Abstract
Background: For decades, copper sulphide has been renowned as the superior optical and semiconductor materials. Its potential applications can be ranged from solar cells, lithium-ion batteries, sensors, and catalyst systems. The synthesis methodologies of copper sulphide with different controlled morphology have been widely explored in the literature. Nevertheless, the understanding on the formation chemistry of CuS is still limited. The ultimate approach undertaking in this article is to investigate the formation of CuS hexagonal plates via the optimization of reaction parameters in hydrothermal reaction between copper (II) nitrate and sodium thiosulphate without appending any assistant agent. Results: Covellite (CuS) hexagonal plates were formed at copper ion: thiosulphate ion ( Cu 2 + : S 2 O 3 2 − ) mole ratio of 1:2 under hydrothermal treatment of 155°C for 12 hours. For synthesis conducted at reaction temperature lower than 155°C, copper sulphate (CuSO4), krohnite (NaCu2(SO4)(H2O)2] and cyclooctasulphur (S8) were present as main impurities with covellite (CuS). When Cu 2 + : S 2 O 3 2 − mole ratio was varied to 1: 1 and 1: 1.5, phase pure plate-like natrochalcite [NaCu2(SO4)(H2O)] and digenite (Cu9S5) were produced respectively. Meanwhile, mixed phases of covellite (CuS) and cyclooctasulphur (S8) were both identified when Cu 2 + : S 2 O 3 2 − mole ratio was varied to 1: 2.5, 1: 3 and 1: 5 as well as when reaction time was shortened to 1 hour. Conclusions: CuS hexagonal plates with a mean edge length of 1 μm, thickness of 100 nm and average crystallite size of approximately (45 ± 2) nm (Scherrer estimation) were successfully synthesized via assisting agent- free hydrothermal method. Under a suitable Cu 2 + : S 2 O 3 2 − mole ratio, we evidenced that the formation of covellite (CuS) is feasible regardless of the reaction temperature applied. However, a series of impurities were attested with CuS if reaction temperature was not elevated high enough for the additional crystallite phase decomposition. It was also identified that Cu 2 + : S 2 O 3 2 − mole ratio plays a vital role in controlling the amount of cyclooctasulphur (S8) in the final powder obtained. Finally, reaction time was recognized as an important parameter in impurity decomposition as well as increasing the crystallite size and crystallinity of the CuS hexagonal plates formed.Keywords
This publication has 42 references indexed in Scilit:
- Controllable synthesis, optical and photocatalytic properties of CuS nanomaterials with hierarchical structuresPowder Technology, 2010
- Controllable hydrothermal synthesis of Cu2S nanowires on the copper substrateMaterials Letters, 2010
- Formation of CuS nanotube arrays from CuCl Nanorods through a gas-solid reaction routeJournal of Crystal Growth, 2007
- Copper(II) sulfide?Minerals Engineering, 2006
- Low-temperature hydrothermal synthesis of pure metastable γ-manganese sulfide (MnS) crystallitesJournal of Crystal Growth, 2002
- Electrochemical behaviors of CuS as a cathode material for lithium secondary batteriesJournal of Power Sources, 2002
- Importance of soft solution processing for advanced inorganic materialsJournal of Materials Research, 1998
- The valence of copper in sulphides and selenides: An X-ray photoelectron spectroscopy studyJournal of the Less Common Metals, 1980
- The Kinetics of the Disproportionation of Sodium Thiosulfate to Sodium Sulfide and SulfateJournal of the American Chemical Society, 1960
- Kinetics of the Oxidation of m-Toluic Acid to Isophthalic Acid by Aqueous Sulfur Solutions1Journal of the American Chemical Society, 1958