Performance of a single slope solar still using different porous absorbing materials: an experimental approach
Open Access
- 12 May 2023
- journal article
- research article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (28) , 72398-72414
Abstract
Desalination is a critical process to address water scarcity in arid regions worldwide, and solar stills provide an economical solution despite their productivity limitations. This study aimed to enhance the performance and productivity of solar stills by constructing two stills with different natural and artificial absorbing materials such as black luffa, luffa, fine steel wool, and steel wool pads. The solar stills were tested in Egypt under comparable weather conditions, and their productivity, solar intensity, wind velocity, and temperature were measured to determine their thermal efficiency and exergo-economic analysis. Results showed that the choice of absorbing material significantly impacted solar still productivity, with steel wool pads achieving the highest yield of 4.384 l/m2. Moreover, steel wool pads also exhibited the highest thermal efficiency at 32.74%. The cost per liter (CPL) was the lowest with steel wool pads at 0.0034 $/l/m2. Finally, the payback period and exergo-economic analysis demonstrated that incorporating steel wool pads was the most promising modification for enhancing solar still performance compared to other modifications.Keywords
All Related Versions
Funding Information
- Tanta University
This publication has 49 references indexed in Scilit:
- Performance analysis on inclined solar still with different new wick materials and wire meshDesalination, 2015
- Experimental Investigations on Performance Evaluation of a Single Basin Solar Still Using Different Energy Absorbing MaterialsAquatic Procedia, 2015
- Modelling and Analysis of Single Slope Solar Still at Different Water DepthAquatic Procedia, 2015
- Temperature Distribution of Single Slope Solar Still by Finite Difference MethodJournal of Applied Sciences, 2014
- Enhancing the stepped solar still performance using internal and external reflectorsEnergy Conversion and Management, 2014
- Thermal asymmetry model of single slope single basin solar still with sponge linerThermal Science, 2014
- Desalination of the brackish water using a passive solar still with a heat energy storage systemDesalination, 2013
- Thermal performance of a single basin solar still with PCM as a storage mediumApplied Energy, 2009
- The role of exergy in energy policy makingEnergy Policy, 2002
- Energy Analysis of Solar Photovoltaic Module Production in IndiaEnergy Sources, 1995