Basalt fibers modified with neutron absorbers for nuclear shielding concrete: fiber manufacture, characterization and dose-rate impact
Authors:
- Maryna HoliukMHMaryna Holiuk
- Ashraf Ali ShaikASAshraf Ali Shaik
- Andrejs KranikovsAKAndrejs Kranikovs
- Oleksandr InshakovOIOleksandr Inshakov
- Mariia KosianchukMKMariia Kosianchuk
- Anatolii NosovskyiANAnatolii Nosovskyi
- Yurii ChuvashovYCYurii Chuvashov
- Iryna DidukIDIryna Diduk
- Olga JashchenkoOJOlga Jashchenko
- Kateryna KrasnikovaKKKateryna Krasnikova
- Hando TohverHTHando Tohver
- Riho MõtlepRMRiho Mõtlep
Preprint
- 16 April 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
Modified basalt fibers doped with neutron-absorbing and gamma-attenuating oxides were developed as a multifunctional concrete admixture for nuclear shielding applications. Within the ECOSCREEN project, basalt microfiber compositions were modified by introducing boron-, gadolinium-, hafnium-, and yttrium-bearing oxides, aiming to achieve a uniform, mix-independent distribution of absorbers in concrete while retaining the durability benefits of fiber reinforcement. The fibers were produced under laboratory conditions and characterized by tensile testing, chemical resistance in aggressive media, and SEM/EDS-based microstructural assessment, confirming stable morphology and the presence of absorber elements. Shielding performance was quantified using continuous-energy Monte Carlo transport simulations with three independent codes (Serpent, MCNP6, OpenMC) employing harmonized geometry, sources, detectors, and ENDF/B-VII.1-based nuclear data. A dedicated cross-verification stage demonstrated consistent predictions of neutron, primary-photon, and activation-photon transport, enabling code-averaged spectra to be used for dose rate assessment. A simplified slab model was evaluated for three representative sources: VVER-1000 spent fuel, RBMK-1500 spent fuel, and a DEMO/EuroFusion activated-water source. For 21 concrete mixes (five modified basalt fiber types at 25-100 kg/m3 plus plain concrete), modified basalt fiber addition produced a monotonic reduction of neutron flux (most pronounced in the thermal range) and a measurable improvement in photon shielding for fibers modified with heavy-element oxides. The largest total dose rate reductions behind the shield were obtained for the hafnium-modified basalt fiber concrete at 100 kg/m3 (13.44% for VVER-1000 spent fuel, 14.24% for RBMK-1500 spent fuel, and 4.97% for the DEMO/EuroFusion source relative to plain concrete).Keywords
This publication has 24 references indexed in Scilit:
- Energy solutions for data center: Comparative analysis of levelized cost of electricity (LCOE) and recent developmentsEnergy Reports, 2025
- Reactivity and power regulation in candle reactorsAnnals of Nuclear Energy, 2020
- Impact of the flowing activated water on maintenance and electronic functioning for the pre-conceptual design of the European DEMO fusion reactorFusion Engineering and Design, 2020
- OpenMC: A state-of-the-art Monte Carlo code for research and developmentAnnals of Nuclear Energy, 2015
- The Serpent Monte Carlo code: Status, development and applications in 2013Annals of Nuclear Energy, 2015
- A review on basalt fibre and its compositesComposites Part B: Engineering, 2015
- Radiation shielding properties of a novel cement–basalt mixture for nuclear energy applicationsNuclear Engineering and Design, 2015
- Cost optimization of ADS design: Comparative study of externally driven heterogeneous and homogeneous two-zone subcritical reactor systemsNuclear Engineering and Design, 2014
- Photon interaction, energy absorption and neutron removal cross section of concrete including marbleAnnals of Nuclear Energy, 2013
- ON THE SUBCRITICAL AMPLIFIER OF NEUTRON FLUX BASED ON ENRICHED URANIUM2007