Improving the Defect Tolerance of PBF‐LB/M Processed 316L Steel by Increasing the Nitrogen Content
Authors:
- Felix SternFSFelix Stern
- Louis BeckerLBLouis Becker
- Chengsong CuiCCChengsong Cui
- Jochen TenkampJochen Tenkamp
- Volker UhlenwinkelVolker Uhlenwinkel
- Matthias SteinbacherMSMatthias Steinbacher
- Johannes BoesJBJohannes Boes
- Jonathan LentzJLJonathan Lentz
- Rainer Fechte-HeinenRainer Fechte-Heinen
- Sebastian WeberSWSebastian Weber
- Frank WaltherFrank Walther
Open Access
- 2 August 2022
- journal article
- research article
- Published by Wiley in Advanced Engineering Materials
- Vol. 25 (1)
Abstract
Nitrogen (N) in steels can improve their mechanical strength by solid solution strengthening. Processing N‐alloyed steels with additive manufacturing, here laser powder bed fusion (PBF‐LB), is challenging as the N‐solubility in the melt can be exceeded. This degassing of N counteracts its intended positive effects. Herein, the PBF‐LB processed 316L stainless steel with increased N‐content is investigated and compared to PBF‐LB 316L with conventional N‐content. The N is introduced into the steel by nitriding the powder and mixing it with the starting powder to achieve an N‐content of approximately 0.16 mass%. Thermodynamic calculations for maximum solubility to avoid N outgassing and pore formation under PBF‐LB conditions are performed beforehand. Based on the results, a higher defect tolerance under fatigue characterized by Murakami model can be achieved without negatively influencing the PBF‐LB processability of the 316L steel. The increased N‐content leads to higher hardness (+14%), yield strength (+16%), tensile strength (+9%), and higher failure stress in short time fatigue test (+16%).Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (372290567)
This publication has 41 references indexed in Scilit:
- Fatigue performance of additive manufactured metallic partsRapid Prototyping Journal, 2013
- Effect of surface residual stress and inclusion size on fatigue failure mode of matrix HSS in very high cycle regimeProcedia Engineering, 2010
- On the relationship between statistical distributions of defect size and fatigue life in 7050-T7451 thick plate and A356-T6 castingsMaterials Science and Engineering: A, 2009
- Effect of Non-Metallic Inclusion Size and Residual Stresses on Gigacycle Fatigue Properties in High Strength SteelAdvanced Materials Research, 2008
- On the fatigue behavior of an AISI 316L stainless steel coated with a PVD TiN depositSurface and Coatings Technology, 2004
- S–N curve characteristics and subsurface crack initiation behaviour in ultra‐long life fatigue of a high carbon‐chromium bearing steelFatigue & Fracture of Engineering Materials & Structures, 2001
- Solidification Phase and Microstructure Selection Maps for Fe-Cr-Ni Alloys.ISIJ International, 1999
- Influence of nitrogen and grain size on deformation behaviour of austenitic stainless steelsMaterials Science and Technology, 1997
- High Nitrogen Steels. High Nitrogen Containing Ni-free Austenitic Steels for Medical Applications.ISIJ International, 1996
- High Nitrogen Steels. Nitrogen in Iron and Steel.ISIJ International, 1996