Synthesis of a thiacalix[4]arenetetrasulfonate-functionalized reduced graphene oxide adsorbent for the removal of lead( ii ) and cadmium( ii ) from aqueous solutions
- 28 November 2016
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (114) , 113352-113365
Abstract
A thiacalix[4]arenetetrasulfonate-functionalized reduced graphene oxide (TCAS–rGO) adsorbent was synthesized and used as an adsorbent for the removal of lead(II) and cadmium(II) from aqueous solutions. TCAS–rGO was characterized by Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), energy dispersive X-ray (EDX) analysis and thermal gravimetric analysis (TGA). The adsorption of Pb(II) and Cd(II) onto TCAS–rGO as a function of pH, contact time, metal ion concentration, and temperature was investigated. Results showed that the adsorption of Pb(II) and Cd(II) onto TCAS–rGO was greatly influenced by the pH. TCAS–rGO shows excellent selective adsorption for Pb(II) and Cd(II) compared with other metals Na(I), K(I), Mg(II) and Sr(II) at neutral pH. The adsorption reached equilibrium within 4 h and the kinetics could be described well by a pseudo-second-order model. The adsorption isotherms for Pb(II) and Cd(II) were fitted by the Langmuir model, and the maximum adsorption capacities of the adsorbent were 230 mg g−1 for Pb(II) and 128 mg g−1 for Cd(II). Thermodynamic studies indicate that the adsorption was a spontaneous and endothermic process in nature. The chloride and nitrate anions may barely influence the adsorption. The TCAS–rGO can be reused as an adsorbent following 4 cycles of adsorption/desorption. Possible adsorption mechanisms are also analysed. This paper provides a potential application of the TCAS–rGO composite in heavy metal treatment.Keywords
This publication has 65 references indexed in Scilit:
- Adsorption characteristics and behaviors of graphene oxide for Zn(II) removal from aqueous solutionApplied Surface Science, 2013
- Removal of toxic Cr(vi) by UV-active functionalized graphene oxide for water purificationJournal of Materials Chemistry A, 2013
- Nitrate uptake by p-phosphonic acid calix[8]arene stabilized grapheneChemical Communications, 2013
- Preparation and adsorption performance of 5-azacytosine-functionalized hydrothermal carbon for selective solid-phase extraction of uraniumJournal of Colloid and Interface Science, 2012
- Heavy metal removal in anaerobic semi-continuous stirred tank reactors by a consortium of sulfate-reducing bacteriaWater Research, 2011
- Adsorption of Lead(II) Ions from Aqueous Solution on Low-Temperature Exfoliated Graphene NanosheetsLangmuir, 2011
- Characteristics of equilibrium, kinetics studies for adsorption of Hg(II), Cu(II), and Ni(II) ions by thiourea-modified magnetic chitosan microspheresJournal of Hazardous Materials, 2009
- Cadmium Ion Adsorption on Different Carbon Adsorbents from Aqueous Solutions. Effect of Surface Chemistry, Pore Texture, Ionic Strength, and Dissolved Natural Organic MatterLangmuir, 2004
- Chelating Adsorbent for Heavy Metal Ions Prepared by Loading Anion-Exchange Resin with Thiacalix[4]arenetetrasulfonateBulletin of the Chemical Society of Japan, 2003
- A New Water-Soluble Host Molecule Derived from ThiacalixareneChemistry Letters, 1998