Impact of Bifacial Modules on the Inverter Clipping in Distributed Generation Photovoltaic Systems in Brazil
Authors:
- 7 November 2021
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Abstract
Distributed generation (DG) solar photovoltaic (PV) power plants in Brazil are limited to 5 MW, considering the inverter output power, according to the normative resolution 687/2015. This limitation creates the challenge of trying to work at maximum power for as long as possible to maximize the profit and reduce the payback time. One of the solutions for this is to increase the plant DC/AC ratio (PV array oversizing). Nevertheless, increasing the DC/AC ratio also generates losses on power production when the total power of the PV modules cannot be handled by the inverters. Power clipping by the PV inverter limiting the power of PV modules is a cause of losses in oversized PV arrays, and this fact can have a higher impact when bifacial modules are used. This paper analyzes the level of clipping and the benefits of PV array oversizing in distributed generation PV power plants with different DC/AC ratios with monofacial and bifacial modules. The System Advisor Model (SAM) is used for simulations with a scenario in Minas Gerais-Brazil. The results show that bifacial modules have a higher influence on clipping losses in comparison with monofacial ones. However, bifacial modules provide more energy production. Therefore, this analysis is important for finding the best DC/AC ratio for bifacial PV arrays.Keywords
This publication has 11 references indexed in Scilit:
- Performance assessment of bifacial c-Si PV modules through device simulations and outdoor measurementsRenewable Energy, 2019
- Study of Power Optimizers for grid-connected photovoltaic systemsIEEE Latin America Transactions, 2019
- Sustainability perspectives- a review for solar photovoltaic trends and growth opportunitiesJournal of Cleaner Production, 2019
- On the Impacts of PV Array Sizing on the Inverter Reliability and LifetimeIEEE Transactions on Industry Applications, 2018
- Impact of inverter loading ratio on solar photovoltaic system performanceApplied Energy, 2016
- Outdoor Performance of Bifacial Modules by Measurements and ModellingEnergy Procedia, 2015
- Analysis of the Annual Performance of Bifacial Modules and Optimization MethodsIEEE Journal of Photovoltaics, 2014
- Determining the optimum grid-connected photovoltaic inverter sizeSolar Energy, 2013
- Impact of inverter configuration on energy cost of grid-connected photovoltaic systemsRenewable Energy, 2012
- 50 Per cent more output power from an albedo-collecting flat panel using bifacial solar cellsSolar Energy, 1982