A compact 3-DOF compliant serial mechanism for trajectory tracking with flexures made by rapid prototyping
Authors:
- 1 May 2012
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 4475-4480
Abstract
To fulfill the needs for accurate trajectory tracking with large displacement in a handheld instrument, a 3-DOF serial compliant mechanism is developed. The mechanism is compact with a total length less than 150 mm and a maximum diameter of 22 mm. Two flexures are developed using different rapid prototyping techniques: one 3-DOF flexural lever made of Vero-Gray by Polyjet and a 1-DOF translational flexure made of stainless steel by Direct Metal Laser Sintering (DMLS). Analytical and Finite Element (FE) models are developed for the proposed flexural mechanisms. Experiments are conducted on a prototype. To improve the tracking accuracy, the hysteretic nonlinearities of the system are modeled using Prandtl-Ishlinskii model. Inverse feedforward controller is implemented to linearize the relationship between input and output. The tracking errors are reduced while maintaining a fast response of the system. The total tracking errors are identified individually for each axis and then compensated. Tracking performances of the tool tip are evaluated experimentally with different inputs. The RMS tracking error of the proposed mechanism is lower than 1 μm in all axes, which is improved more than four times compared to the previous systems.Keywords
This publication has 8 references indexed in Scilit:
- Design and experimental investigations of high power piezoelectric transducers for a novel squeeze film journal bearing2009
- Design, Identification, and Control of a Flexure-Based XY Stage for Fast Nanoscale PositioningIEEE Transactions on Nanotechnology, 2008
- Review of circular flexure hinge design equations and derivation of empirical formulationsPrecision Engineering, 2008
- Feedforward Controller With Inverse Rate-Dependent Model for Piezoelectric Actuators in Trajectory-Tracking ApplicationsIEEE/ASME Transactions on Mechatronics, 2007
- Flexure-based Manipulator for Active Handheld Microsurgical Instrument2005
- Toward active tremor canceling in handheld microsurgical instrumentsIEEE Transactions on Robotics and Automation, 2003
- Modeling, Identification and Compensation of Complex Hysteretic Nonlinearities: A Modified Prandtl-Ishlinskii ApproachEuropean Journal of Control, 2003
- Pre-stressing a Tonpilz transducerThe Journal of the Acoustical Society of America, 1995