Performance investigation of doubly salient outer rotor switched reluctance motor using finite element analysis
Authors:
- 5 July 2021
- journal article
- research article
- Published by Emerald Publishing in Circuit World
- Vol. 48 (4) , 412-424
Abstract
Purpose: The automotive industry extensively uses switched reluctance motors (SRM) because of their excellent performance. The main purpose of this article is to investigate the design of a particular type of SRM called doubly salient outer rotor switched reluctance motor (DSORSRM) for electric vehicle application in this paper. Design/methodology/approach: Different configurations of DSORSRM motor such as long flux path SRM, reduced flux path mutually coupled SRM and short flux path SRM (SF-SRM) are considered for investigation. The best configuration based on average torque is selected for further investigation by conducting an electromagnetic analysis. Also, in the proposed design, laminating material with low iron loss and superior performance characteristics is selected by doing electromagnetic analysis for SRM with M19, M660-50D, M-19 and M800-100A non-oriented laminating core material. Because vibrations are produced in DSORSRM devices as a result of changing induction, a mechanical analysis was performed to estimate the natural frequencies of vibration and the amplitudes that may lead to acoustic noises. Findings: SF-SRM configuration with three-phase, 12/10, 250 W, 48 V, 1,000 rpm is selected with the impact in the elimination of flux reversals and also has various salient features such as singly excited, no rotor windings, no permanent magnet, pure in construction and high starting torque. Still, this SRM suffers from vibration owing to changing induction. In lamination material selection, M19 is chosen as optimized material to obtain vibration reduction. Vibration analysis was performed for the optimized 12/10 SF-SRM with M19 lamination material, and the corresponding modes for the machine to operate with reduced vibration are analyzed. The current and speed characteristics of the prototype model for the DSORSRM motor are obtained and validated with finite element analysis (FEA) results. Originality/value: The performed FEA result shows that the proposed DSORSRM with short flux path configuration produces a high average torque of 1.915 N m. The M19 lamination material gives a minimum iron loss of 9.056 W. The modal frequencies are estimated and validated with numerical equations.Keywords
This publication has 20 references indexed in Scilit:
- Effect of Material Properties on Core Loss in Switched Reluctance Motor using Non-Oriented Electrical SteelsJournal of Magnetics, 2017
- Design of Mutually Coupled Switched Reluctance Motors (MCSRMs) for Extended Speed Applications Using 3-Phase Standard InvertersIEEE Transactions on Energy Conversion, 2015
- Prediction of Radial Vibration in Switched Reluctance MachinesIEEE Transactions on Energy Conversion, 2013
- An Improved 9/12 Two-Phase E-Core Switched Reluctance MachineIEEE Transactions on Energy Conversion, 2013
- Optimal design of switched reluctance motorsIEEE Transactions on Industrial Electronics, 2002
- Minimization of torque ripple in SRM drivesIEEE Transactions on Industrial Electronics, 2002
- The modeling of switched reluctance machines with magnetically coupled windingsIEEE Transactions on Industry Applications, 2001
- An investigation into vibration in switched reluctance motorsIEEE Transactions on Industry Applications, 1999
- Analysis and Reduction of Vibration and Acoustic Noise in the Switched Reluctance DriveIEEE Transactions on Industry Applications, 1995
- Magnetic field analysis of a switched reluctance motor using a two dimensional finite element modelIEEE Transactions on Magnetics, 1985