Study of polypropylene/montmorillonite nanocomposites prepared by solid‐state shear compounding (S3C) using pan‐mill equipment: the morphology of montmorillonite and thermal properties of the nanocomposites
Authors:
- 6 December 2004
- journal article
- research article
- Published by Wiley in Polymer International
- Vol. 54 (2) , 336-341
Abstract
In this paper, polypropylene (PP)/organophilic montmorillonite (OMMT) nanocomposites were successfully prepared without any compatibilizers by solid‐state shear compounding (S3C) using pan‐mill equipment. X‐ray diffraction (XRD) patterns show that the OMMT characteristic (001) peak at 2θ equal to 4.59 degrees disappeared for the milled OMMT and corresponding composites. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) photographs show that the thickness of pan‐milled OMMT decreased from ca 100–200 nm to ca 30–50 nm, and OMMT was partly exfoliated in the PP matrix because the pan‐type mill can exert fairly strong squeezing force in the normal direction and shearing force in both radial and tangential directions on milled materials. PP/OMMT nanocomposites at low OMMT loading have higher melting point, crystallization temperature, thermal degradation temperature and heat distortion temperature than those of neat PP. Moreover, addition of OMMT accelerates crystallization of PP significantly. S3C is a novel approach to prepare polymer/layered silicate nanocomposites with high performances at low filler loading. Copyright © 2004 Society of Chemical IndustryKeywords
This publication has 16 references indexed in Scilit:
- PP/clay nanocomposites prepared by grafting-melt intercalationPolymer, 2001
- Polypropylene/Montmorillonite Nanocomposites. Review of the Synthetic Routes and Materials PropertiesChemistry of Materials, 2001
- Crystal ordering of α phase isotactic polypropylenePolymer, 2001
- Rheology of Polypropylene/Clay Hybrid MaterialsMacromolecules, 2001
- A Rheological Study on the Kinetics of Hybrid Formation in Polypropylene NanocompositesMacromolecules, 2001
- Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materialsMaterials Science and Engineering: R: Reports, 2000
- Synthesis and structure of smectic clay/poly(methyl methacrylate) and clay/polystyrene nanocomposites via in situ intercalative polymerizationPolymer, 2000
- A study on the pan‐milling process and the pulverizing efficiency of pan‐mill type equipmentPolymer Engineering & Science, 1997
- Interaction of nylon 6‐clay surface and mechanical properties of nylon 6‐clay hybridJournal of Applied Polymer Science, 1995
- Crystalline order and melting behavior of isotactic polypropylene (α form)Journal of Polymer Science: Polymer Physics Edition, 1984