Manufacturing non-sintered ceramsite from dredged sediment, steel slag, and fly ash for lightweight aggregate: production and characterization
Authors:
- 29 January 2024
- journal article
- research article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 31 (10) , 15078-15090
Abstract
Green and low-carbon materialization for dredged sediment (DS) is limited due to its low pozzolanic activity. In this study, a novel DS-based non-sintered lightweight aggregate (LWA) is developed by steel slag (SS) and fly ash (FA) activation. Process optimization is performed by the response surfaces, and the basic properties and characterization of the optimal product are investigated. Results indicated that the optimized design ceramic aggregate (ODCA) was prepared as follows: raw pellets comprising of 59.2% DS, 5% SS, 35.8% FA, 5% MK, 5% H2O2, and 2‰ foam stabilizer were activated by alkali activator (1.5 weight ratio of 14 M NaOH to water glass) and then cured at 80 °C and 95% humidity for 24 h. The basic and environmental performances of ODCA were in accordance with standards, whose bulk density was as low as 665.8 kg/m3, the high cylinder compressive strength was 6.143 MPa, and leaching concentrations of heavy metals were controllable. The regulation mechanism of LWA performances could be summarized as follows. SS and FA additives played the role for the mechanical strength enhancement and passivation of heavy metals, which promoted the formation of sillimanite, chabazite, and C-S–H / C-S-A-H gels in ODCA. The bulk density of ODCA was greatly reduced by H2O2 addition, where ODCA had an open-pore structure with a median pore size of 4969.75 nm. Note that C-S–H/C-S-A-H were the key hydration products to give ODCA light density and high mechanical strength, simultaneously.Keywords
Funding Information
- National Natural Science Foundation of China (51908433)
- Knowledge Innovation Program of Wuhan-Shuguang Project (2022020801020251)
This publication has 54 references indexed in Scilit:
- Utilization of oil palm kernel shell as lightweight aggregate in concrete – A reviewConstruction and Building Materials, 2013
- Electrokinetic remediation of dredged sediments polluted with heavy metals with different enhancing electrolytesElectrochimica Acta, 2012
- Chemical stabilization of air pollution control residues from municipal solid waste incinerationJournal of Hazardous Materials, 2010
- XPS and FT-IR investigation of silicate polymersJournal of Materials Science, 2009
- Eco-friendly Fly Ash Utilization: Potential for Land ApplicationCritical Reviews in Environmental Science and Technology, 2009
- Landfill leachate treatment: Review and opportunityJournal of Hazardous Materials, 2008
- Recycling of harbor sediment as lightweight aggregateMarine Pollution Bulletin, 2008
- Influence of Slag as Additive on Compressive Strength of Fly Ash-Based GeopolymerJournal of Materials in Civil Engineering, 2007
- Existing sediment management guidelines: an overviewJournal of Soils and Sediments, 2003
- Adsorption/Desorption Hysteresis in Organic Pollutant and Soil/Sediment InteractionEnvironmental Science & Technology, 1994