Valorization of Mopa Mopa Resin as a Renewable Bio-Based Adhesion Promoter for Sustainable Wood Adhesives
Authors:
- Juan Pablo Pacheco-ValenciaJPJuan Pablo Pacheco-Valencia
- Brayan Alexis Quiñones-MosqueraBQBrayan Alexis Quiñones-Mosquera
- Nicolas Martínez-MeraNicolas Martínez-Mera
- Fred Albán-AchinteFAFred Albán-Achinte
- Mario Fernando Muñoz-VelezMario Fernando Muñoz-Velez
- Jose Herminsul Mina-HernandezJose Herminsul Mina-Hernandez
Open Access
Abstract
The search for renewable raw materials for developing wood adhesives has driven the study of natural resins with intrinsic adhesive properties. This work evaluated Mopa Mopa resin (Elaeagia pastoensis Mora) as an adhesion promoter in formulations for wood-to-wood bonding of pine. Initially, the individual behavior of the main components was assessed, and subsequently, nine systems were formulated by combining Mopa Mopa resin with polyvinyl acetate (PVAc), polyvinyl alcohol (PVA-OH), and starch. The selected formulations were compared with two commercial adhesives using shear and direct tensile strength tests, physical properties, FTIR, TGA, DSC, and fracture surface analysis. Mopa Mopa resin, evaluated individually, achieved a shear strength of 6.657 MPa, second only to that obtained with PVAc among the components studied. Following the initial screening stage, formulations F-3 and F-5 were selected and subsequently prepared as final adhesive systems containing 5.8% additives. Final formulation F-3 consisted of 54.2% PVAc, 20% Mopa Mopa resin, 20% PVA-OH, and 5.8% additives, whereas F-5 consisted of 29.5% PVAc, 37.5% Mopa Mopa resin, 27.2% cassava starch, and 5.8% additives. F-3 achieved a shear strength of 7.792 MPa, surpassing the commercial adhesive C1 (6.328 MPa), while F-5 achieved the highest average direct tensile strength (1.371 MPa). Physicochemical characterization confirmed the presence of functional groups associated with the formulation components, while fracture analysis of F-3 revealed cohesive, mixed, and substrate failures. Taken together, the results demonstrate the potential of Mopa Mopa resin as a functional component and adhesion promoter in wood formulations, allowing its combination with synthetic polymers and renewable raw materials to obtain bonds with competitive mechanical performance.Keywords
Funding Information
- Vicerrectoría de Investigaciones of the Universidad del Valle through the 2023 Interinstitutional Research Call “Ríos Hermanos” (CI 21253)
This publication has 48 references indexed in Scilit:
- Shellac as a renewable bio-based adhesive for wood bonding: Toward cleaner and sustainable material solutionsCleaner Engineering and Technology, 2026
- Shear strength of beech wood joints bonded with commercially produced PVAc D3 adhesivesInternational Journal of Adhesion and Adhesives, 2021
- The identification and screening of lower toxicity solvents for contact adhesivesInternational Journal of Adhesion and Adhesives, 2017
- Effects of compound emulsifiers on properties of wood adhesive with high starch contentInternational Journal of Adhesion and Adhesives, 2017
- Application of polyvinyl alcohol (PVA) in cement-based composite materials: A review of its engineering properties and microstructure behaviorConstruction and Building Materials, 2016
- Wetting and film formation of wheat gluten dispersions applied to wood substrates as particle board adhesivesEuropean Polymer Journal, 2015
- Contact Angle and Wetting Properties2013
- State of research and trends in development of wood adhesivesForest Science and Practice, 2011
- Differential scanning calorimetry (DSC) of semicrystalline polymersAnalytical and Bioanalytical Chemistry, 2009
- The structure of neoprene. VI. CrystallizationJournal of Polymer Science, 1954