Fatigue properties of riveted joints under different hole perpendicularity errors and squeeze forces
- 13 February 2024
- journal article
- research article
- Published by Wiley in Microscopy Research and Technique
- Vol. 87 (6) , 1262-1270
Abstract
Riveting is the most important method of joining sheet metal and is widely used in the assembly of aircraft components. The perpendicularity error of the holes is unavoidable during automatic drilling and riveting, which has a significant impact on the quality of the assembly. In this paper, the effects of hole perpendicularity error and squeeze force on the interference fit size, interface contact state, microstructure morphology, fatigue life, and fracture form of riveted joints were investigated experimentally. The results show that the interference fit size increases with a greater tilt angle. When the tilt angle is 0°, the rivet shank is in close contact with the inner and outer sheets, and there is no obvious gap at the interface between the rivet and the sheets. As the tilt angle increases to 2° and 4°, a gap appears at the interface of regions 1, 2, and 3, while the rivet shank at region 4 is in close contact with the outer sheet. The fatigue life decreases when the tilt angle increases from 0° to 4°. For the same tilt angle, the fatigue life of riveted joints with a 0° tilt direction is higher than that of riveted joints with a 180° tilt direction. Increasing the squeeze force can to some extent reduce the adverse effect of the tilt angle on the fatigue life. The hole perpendicularity error does not affect the failure form, while the squeeze force has a significant effect on the failure form of the specimens.Research Highlights: The fatigue life of riveted joints decreases as the tilt angle increases. The size of the interfacial gap increases with increasing tilt angle. Higher fatigue life at 0° tilt direction than at 180° tilt direction. Increasing the squeeze force can somewhat reduce the negative effect of tilt angle on fatigue life.Keywords
Funding Information
- Jiangsu Provincial Key Research and Development Program
This publication has 14 references indexed in Scilit:
- Influence of riveting die configuration and squeeze force on the mechanical properties and fatigue behavior of aircraft lap jointsEngineering Failure Analysis, 2022
- Effect of hole perpendicularity error and squeeze force on the mechanical behaviors of riveted jointsMicroscopy Research and Technique, 2021
- Adhesive bond-electromagnetic rivet hybrid joining technique for CFRP/Al structure: Process, design and propertyComposite Structures, 2020
- An experimental study on mechanical response of single-lap bolted CFRP composite interference-fit jointsComposite Structures, 2018
- The effect of drilling parameters, cooling technology, and fiber orientation on hole perpendicularity error in fiber metal laminatesThe International Journal of Advanced Manufacturing Technology, 2018
- Fatigue life prediction model for riveted lap jointsEngineering Failure Analysis, 2015
- Auto-normalization algorithm for robotic precision drilling system in aircraft component assemblyChinese Journal of Aeronautics, 2013
- Joining by plastic deformationCIRP Annals, 2013
- Study of the impact of riveting sequence, rivet pitch, and gap between sheets on the quality of riveted lap joints using finite element methodThe International Journal of Advanced Manufacturing Technology, 2012
- Effect of variations in the riveting process on the quality of riveted jointsThe International Journal of Advanced Manufacturing Technology, 2007