Modeling and Analysis of a Wavy Thrust Bearing
Authors:
- 1 January 2002
- journal article
- research article
- Published by Taylor & Francis in Tribology Transactions
- Vol. 45 (1) , 85-93
Abstract
This paper presents an analytical and numerical development for the simulation of a wavy thrust bearing. The analytical formulation is based on an expanded, compressible Reynolds equation model, while the numerical procedure is based on the solution of the discretized (finite difference) form of the Reynolds equation. Effects of the bearing radius, clearance, lubricant viscosity, circumferential wave amplitude, and angular velocity are examined. Numerical results of the parametric studies are summarized through graphs for the pressure distributions and resulting load capacities. The major findings of this study show that the wavy configuration, even for extremely low wave amplitudes, produces significant pressure build-up and thus allows the generation of relatively large load carrying capacities. It has also been determined that while the bearing number A, angular velocity, surface wave period and viscosity do not affect the phase angle between the peak pressure and the bearing surface wave, the wave amplitude ‘g’ does indeed substantially change the phase angle. It has been concluded that the continuous wavy configuration acts as a succession of mini-slider bearings and is a rather viable alternative to the Raleigh step, or spiral configurations for a self-acting thrust bearing.Keywords
This publication has 12 references indexed in Scilit:
- Maximum Load Capacity Profiles for Gas Thrust Bearings Working Under High Compressibility Number ConditionsJournal of Tribology, 1998
- Thermoelastohydrodynamic Analysis of Fixed Geometry Thrust Bearings Including Runner DeformationTribology Transactions, 1996
- Wave Journal Bearing with Compressible Lubricant—Part I: The Wave Bearing Concept and a Comparison to the Plain Circular BearingTribology Transactions, 1995
- The Effects of a Hydrostatic Pocket Aspect Ratio, Supply Orifice Position, and Attack Angle on Steady-State Flow Patterns, Pressure, and Shear CharacteristicsJournal of Tribology, 1993
- Nonlinear Study of a Misaligned Hydrodynamic Journal BearingTribology Transactions, 1993
- Further Test Results of the Leading-Edge-Groove (LEG) Tilting Pad Thrust BearingJournal of Tribology, 1988
- Analysis of Starved Thrust Bearings Including Temperature EffectsJournal of Tribology, 1987
- The Leading-Edge-Groove Tilting-Pad Thrust Bearing: Recent DevelopmentsJournal of Tribology, 1985
- A Comparison of Tilting Pad Thrust Bearing Lubricant Supply MethodsJournal of Lubrication Technology, 1983
- A Three-Dimensional Thermohydrodynamic Analysis of Sector Thrust BearingsA S L E Transactions, 1974