Determining the Optimal Window Length for Pattern Recognition-Based Myoelectric Control: Balancing the Competing Effects of Classification Error and Controller Delay
Top Cited Papers
- 30 December 2010
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Neural Systems and Rehabilitation Engineering
- Vol. 19 (2) , 186-192
Abstract
Pattern recognition-based control of myoelectric prostheses has shown great promise in research environments, but has not been optimized for use in a clinical setting. To explore the relationship between classification error, controller delay, and real-time controllability, 13 able-bodied subjects were trained to operate a virtual upper-limb prosthesis using pattern recognition of electromyogram (EMG) signals. Classification error and controller delay were varied by training different classifiers with a variety of analysis window lengths ranging from 50 to 550 ms and either two or four EMG input channels. Offline analysis showed that classification error decreased with longer window lengths ( p <; 0.01). Real-time controllability was evaluated with the target achievement control (TAC) test, which prompted users to maneuver the virtual prosthesis into various target postures. The results indicated that user performance improved with lower classification error ( p <; 0.01 ) and was reduced with longer controller delay ( p <; 0.01), as determined by the window length. Therefore, both of these effects should be considered when choosing a window length; it may be beneficial to increase the window length if this results in a reduced classification error, despite the corresponding increase in controller delay. For the system employed in this study, the optimal window length was found to be between 150 and 250 ms , which is within acceptable controller delays for conventional multistate amplitude controllers.Keywords
This publication has 22 references indexed in Scilit:
- Targeted Muscle Reinnervation for Real-time Myoelectric Control of Multifunction Artificial ArmsJAMA, 2009
- Estimating the Prevalence of Limb Loss in the United States: 2005 to 2050Archives of Physical Medicine and Rehabilitation, 2008
- A Real-Time EMG Pattern Recognition System Based on Linear-Nonlinear Feature Projection for a Multifunction Myoelectric HandIEEE Transactions on Biomedical Engineering, 2006
- A Gaussian Mixture Model Based Classification Scheme for Myoelectric Control of Powered Upper Limb ProsthesesIEEE Transactions on Biomedical Engineering, 2005
- A heuristic fuzzy logic approach to EMG pattern recognition for multifunctional prosthesis controlIEEE Transactions on Neural Systems and Rehabilitation Engineering, 2005
- Continuous Myoelectric Control for Powered Prostheses Using Hidden Markov ModelsIEEE Transactions on Biomedical Engineering, 2004
- A robust, real-time control scheme for multifunction myoelectric controlIEEE Transactions on Biomedical Engineering, 2003
- A new strategy for multifunction myoelectric controlIEEE Transactions on Biomedical Engineering, 1993
- Myoelectric Prostheses: state of the artJournal of Medical Engineering & Technology, 1988
- Multifunctional prosthesis and orthosis control via microcomputer identification of temporal pattern differences in single-site myoelectric signalsJournal of Biomedical Engineering, 1982