Relationship between Surface Hardness and Peak Interfacial Frictional Coefficient in a Laboratory Scale Setting
Open Access
- 20 October 2022
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 12 (20) , 10607
Abstract
This study aims to clarify the relationship between surface hardness and the peak interfacial frictional coefficient under different particle sizes. The relationship between particle size and the peak interfacial frictional coefficient with different surface hardness values has not been addressed in previous literature. A pile-soil interfacial shear test was conducted using a multifunctional interfacial shear instrument was developed in the laboratory. The influences of surface hardness and particle size on the shear characteristics of pile-soil interfaces and the peak interface friction coefficient were studied. The test results revealed that the interfacial shear stress-shear displacement curves showed typical softening behavior when the surface of the model pile was smooth. The difference in curve characteristics for different particle sizes gradually cleared as the surface hardness decreased. The initial shear stiffness of the interface increased with increasing surface hardness and decreased with increasing particle size. The peak interfacial friction coefficient decreased with increasing surface hardness for different particle sizes. Furthermore, the peak interface friction coefficient increased with increasing particle size when the surface was hard. However, when the surface was soft, the peak interfacial friction coefficient decreased with increasing particle size. The linear relationship between the peak interfacial friction coefficient and particle size for different surface hardness values was established.Keywords
Funding Information
- National Natural Science Foundation of China (52079126, ZYQR201912156)
- Tiptop Young Talent Program of Central Plains (52079126, ZYQR201912156)
This publication has 30 references indexed in Scilit:
- Role of Initial State, Material Properties, and Confinement Condition on Local and Global Soil-Structure Interface BehaviorJournal of Geotechnical and Geoenvironmental Engineering, 2009
- Microscale Observation and Modeling of Soil-Structure Interface Behavior Using Particle Image VelocimetrySoils and Foundations, 2006
- The Peak Strength of Sand-Steel Interfaces and the Role of DilationSoils and Foundations, 2005
- Role of overconsolidation on sand–geomembrane interface response and material damage evolutionGeotextiles and Geomembranes, 2005
- Shear failure behavior of granular–continuum interfacesEngineering Fracture Mechanics, 2002
- Soil-geotextile interface friction by direct shear testsCanadian Geotechnical Journal, 2000
- Peak Friction Behavior of Smooth Geomembrane-Particle InterfacesJournal of Geotechnical and Geoenvironmental Engineering, 1999
- Shear Strength Characteristics of Sand‐Polymer InterfacesJournal of Geotechnical Engineering, 1990
- Frictional Resistance at Yield between Dry Sand and Mild SteelSoils and Foundations, 1986
- Skin Friction between Various Soils and Construction MaterialsGéotechnique, 1961