Mechanical response of atomic layer deposition alumina coatings on stiff and compliant substrates
Author:
- 28 December 2011
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 30 (1) , 01A160
Abstract
In this study, the mechanical properties of atomic layer deposition (ALD) alumina coatings deposited at a range of temperatures from 80 °C onto substrates with differing stiffness including hard, stiff materials (silicon and glass) and soft, compliant materials (PET) have been investigated by nanoindentation. Approaches necessary to extract coating properties from the coating/substrate composite data have been developed in order to obtain reliable data from 150 nm thick coatings on hard, stiff substrates. This has shown that the elastic modulus of ALD alumina increases with deposition temperature as might be expected from the variation in density. Measurements for the ALD alumina coatings on PET using the same analysis method give lower elastic Modulus and hardness values; this is not due to an intrinsic difference in coating properties but is a consequence of the effect of modulus mismatch between coating and substrate on the measurement method. Reliable data for the coatings on PET are therefore more difficult to obtain but can be determined if a suitable modeling approach is adopted.Keywords
This publication has 17 references indexed in Scilit:
- On the factors affecting the critical indenter penetration for measurement of coating hardnessVacuum, 2009
- Nanoindentation Investigation of HfO[sub 2] and Al[sub 2]O[sub 3] Films Grown by Atomic Layer DepositionJournal of the Electrochemical Society, 2008
- Atomic layer deposited alumina (Al2O3) thin films on a high-Qmechanical silicon oscillatorJournal of Micromechanics and Microengineering, 2007
- Alternative dielectric films for rf MEMS capacitive switches deposited using atomic layer deposited Al2O3/ZnO alloysSensors and Actuators A: Physical, 2007
- The mechanical properties of atomic layer deposited alumina for use in micro- and nano-electromechanical systemsSensors and Actuators A: Physical, 2006
- Nanoindentation of coatingsJournal of Physics D: Applied Physics, 2005
- Mechanical and thermal properties of physical vapour deposited alumina films Part II Elastic, plastic, fracture, and adhesive behaviourJournal of Materials Science, 2004
- Elemental thin film depth profiles by ion beam analysis using simulated annealing - a new toolJournal of Physics D: Applied Physics, 2003
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992
- The reaction pathway for the growth of alumina on high surface area alumina and in ultrahigh vacuum by a reaction between trimethyl aluminum and waterJournal of Vacuum Science & Technology A, 1991