Seawater degradable thermoplastic polyurethanes
- 7 October 2009
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 115 (3) , 1873-1880
Abstract
Degradable thermoplastic polyurethane (TPU) elastomers incorporating poly(D,L‐lactide‐co‐glycolide) (PLGA) were synthesized and characterized. The soft segments consisted of a mixture of poly(butylene adipate) (PBA) and PLGA with PBA/PLGA ratios of 100/0, 75/25, and 50/50 wt %. Two PLGA polyesters were used. BD‐PLGA was initiated from butanediol; whereas BHMBA‐PLGA was initiated from 2,2‐bis‐(hydroxymethyl)butanoic acid. The hard segments consisted of dicyclohexylmethane‐4,4′‐diisocyanate (H12MDI) and 1,4‐butanediol (BD). The hard segment content, expressed as the weight ratio of BD to polyol used in the TPU formulation, was set either at 8 or 12% (31.2 or 38.1% hard segment by weight, respectively). In all cases initial [NCO]/[OH] ratio was 1.03. The tensile modulus of the TPUs ranged from 9 to 131 MPa and ultimate strains ranged from 100 to 750%. DMA was used to probe the thermomechanical transitions of the TPUs and indicated useful application temperatures from well below zero up to 60–80°C depending on the formulation. Hydrolytic degradation of the TPUs was tested in seawater at 37°C. All of the PLGA‐containing TPUs showed enhanced degradation compared to those with only PBA as the soft segment. The latter compositions remained essentially unchanged throughout the test while the PLGA‐containing TPUs lost as much as 45% of their initial mass in 153 days. Molecular weights of TPUs containing degradable polyols were lower than those derived from 100% PBA polyol. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010Keywords
This publication has 14 references indexed in Scilit:
- Biodegradable Polyurethanes: Synthesis and Applications in Regenerative MedicineTissue Engineering Part B: Reviews, 2008
- Poly(lactic Acid) and Chain-Extended Poly(lactic acid)−Polyurethane Functionalized with Pendent Carboxylic Acid GroupsMacromolecules, 2008
- Thermoplastic biodegradable polyurethanes: The effect of chain extender structure on properties and in-vitro degradationBiomaterials, 2007
- Synthesis of Highly Elastic Biodegradable Poly(urethane urea)Biomacromolecules, 2007
- Strategies in Aliphatic Polyester Synthesis for Biomaterial and Drug Delivery Applications2006
- Biodegradable aliphatic thermoplastic polyurethane based on poly(ε‐caprolactone) and L‐lysine diisocyanateJournal of Polymer Science Part A: Polymer Chemistry, 2006
- Synthesis and characterization of novel biodegradable epoxy‐modified polyurethane elastomersJournal of Polymer Science Part A: Polymer Chemistry, 2005
- Preparation and characterization of highly porous, biodegradable polyurethane scaffolds for soft tissue applicationsBiomaterials, 2005
- Hydrolyzable poly(ester‐urethane) networks from L‐lysine diisocyanate and D,L‐lactide/ϵ‐caprolactone homo‐ and copolyester triolsJournal of Polymer Science Part A: Polymer Chemistry, 1994
- Biodegradable lysine diisocyanate-based poly(glycolide-co-ϵ-caprolactone)-urethane network in artificial skinBiomaterials, 1990