Equal weighted cost function based weighting factor tuning method for model predictive control in power converters
Authors:
Open Access
- 22 November 2021
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in IET Power Electronics
- Vol. 15 (3) , 203-215
Abstract
An equal‐weighted cost function‐based weighting factor tuning method for model predictive control (MPC) in power converters is presented here. In conventional MPC methods developed for power converters, the use of weighting factors is a necessity to determine the importance of sub‐terms in multi‐objective cost functions. The proposed method is based on equalizing the importance of cost terms by using normalized values rather than the actual values. As a consequence of normalized values, all sub‐terms are transformed into a similar range independent from their actual values. Hence, the weights of cost terms are equalized, leading to the elimination of weighting factor tuning necessity. The proposed equal‐weighted cost function not only offers simplicity in the MPC design but also guarantees the desired controller performance with the dynamically weighted sub‐terms. The proposed control method is validated on a grid‐connected single‐phase three‐level T‐type inverter. Experimental results are carried out to demonstrate the effectiveness of the proposed method under steady‐state and dynamic conditions. Moreover, the comparative results with the conventional MPC are presented. The results reveal that the proposed approach exhibits excellent performance against the variations in the operating point of the inverter.Keywords
Funding Information
- Qatar National Research Fund (NPRP12S‐0214‐190083)
This publication has 26 references indexed in Scilit:
- Model-Based Current Control for Single-Phase Grid-Tied Quasi-Z-Source Inverters With Virtual Time ConstantIEEE Transactions on Industrial Electronics, 2018
- Predictive Control of Power Electronic Converters2018
- Finite-Control-Set Model-Predictive Control for a Quasi-Z-Source Four-Leg Inverter Under Unbalanced Load ConditionIEEE Transactions on Industrial Electronics, 2016
- Diode-Free T-Type Three-Level Neutral-Point-Clamped Inverter for Low-Voltage Renewable Energy SystemIEEE Transactions on Industrial Electronics, 2014
- Modeling and Control of Quasi-Z-Source Inverter for Distributed Generation ApplicationsIEEE Transactions on Industrial Electronics, 2012
- Predictive Torque and Flux Control Without Weighting FactorsIEEE Transactions on Industrial Electronics, 2012
- A Survey on Neutral-Point-Clamped InvertersIEEE Transactions on Industrial Electronics, 2009
- A Survey on Cascaded Multilevel InvertersIEEE Transactions on Industrial Electronics, 2009
- Guidelines for weighting factors design in Model Predictive Control of power converters and drives2009
- Multilevel inverters: a survey of topologies, controls, and applicationsIEEE Transactions on Industrial Electronics, 2002