Effect of Machine Direction Orientation Conditions On Properties of Hdpe Films
Authors:
- 1 July 2009
- journal article
- research article
- Published by SAGE Publications in Journal of Plastic Film & Sheeting
- Vol. 25 (3-4) , 235-249
Abstract
In this study, the effects of machine direction orientation (MDO) conditions on crystalline orientation, morphology, and mechanical performance of a high-density polyethylene film were investigated. The MDO variables studied were feed speed, stretching temperature, draw ratio (DR) as well as annealing temperature. The type of crystals (spherulites or fibrils) and crystallinity of the films were considered using differential scanning calorimetry. The MDO process increased the film crystallinity by 18% and melting temperature (Tm ) by 5°C. The crystalline phase orientation was measured using Fourier transform infrared and wide angle X-ray diffraction. Stretching noticeably increased the crystalline alignment. The Young’s modulus decreased with increasing extrusion temperature and feed speed and enhanced with rising annealing temperature. However, up to DR = 6, the Young’s modulus decreased with draw ratio whereas it increased beyond DR = 6. Upon drawing, the tear resistance along the machine direction decreased significantly, but the puncture resistance along the normal direction increased drastically. Finally, drawing lowered haze for the films dramatically, hence, improved the clarity significantly.Keywords
This publication has 11 references indexed in Scilit:
- Properties of uniaxially stretched polypropylene films: effect of drawing temperature and random copolymer contentThe Canadian Journal of Chemical Engineering, 2010
- Microporous membranes obtained from PP/HDPE multilayer films by stretchingJournal of Membrane Science, 2009
- Properties of uniaxially stretched polypropylene filmsThe Canadian Journal of Chemical Engineering, 2008
- The role of interlamellar chain entanglement in deformation-induced structure changes during uniaxial stretching of isotactic polypropylenePolymer, 2007
- Integrated mechanism for the morphological structure development in HDPE melt‐blown and machine‐direction‐oriented filmsJournal of Polymer Science Part B: Polymer Physics, 2007
- Flow-induced shish-kebab precursor structures in entangled polymer meltsPolymer, 2005
- Study of Polypropylene Morphology Obtained from Blown and Cast Film Processes: Initial Morphology Requirements for Making Porous Membrane by StretchingJournal of Plastic Film & Sheeting, 2005
- Elongational rheology of LLDPE / LDPE blendsJournal of Applied Polymer Science, 2003
- AFM of Poly(vinyl alcohol) Crystals Next to an Inorganic SurfaceMacromolecules, 2001
- Draw-ratio-dependent morphology of biaxially oriented polypropylene films as determined by atomic force microscopyPolymer, 2000