A Numerical Study of the Effect of Component Dimensions on the Critical Buckling Load of a GFRP Composite Strut under Uniaxial Compression
Open Access
Abstract
In the practical design of thin-walled composite columns, component dimensions should be wisely designed to meet the buckling resistance and economic requirements. This paper provides a novel and useful investigation based on a numerical study of the effects of the section dimensions, thickness ratio, and slenderness ratio on the critical buckling load of a thin-walled composite strut under uniaxial compression. The strut was a channel-section-shaped strut and was made of glass fiber-reinforced polymer (GFRP) composite material by stacking symmetrical quasi-isotropic layups using the autoclave technique. For the purpose of this study, a numerical finite element model was developed for the investigation by using ABAQUS software. The linear and post-buckling behavior analysis was performed to verify the results of the numerical model with the obtained buckling load from the experiment. Then, the effects of the cross-section dimensions, thickness ratio, and slenderness ratio on the critical buckling load of the composite strut, which is determined using an eigenvalue buckling analysis, were investigated. The implementation results revealed an insightful interaction between cross-section dimensions and thickness ratio and the buckling load. Based on this result, a cost-effective design was recommended as a useful result of this study. Moreover, a demarcation point between global and local buckling of the composite strut was also determined. Especially, a new design curve for the channel-section GFRP strut, which is governed by the proposed constitutive equations, was introduced to estimate the critical buckling load based on the input component dimension.Keywords
Funding Information
- National Research Foundation of Korea (No. 2018R1C1B5086385)
This publication has 36 references indexed in Scilit:
- Recent advances in drilling of carbon fiber–reinforced polymers for aerospace applications: a reviewThe International Journal of Advanced Manufacturing Technology, 2019
- Blast responses of concrete beams reinforced with GFRP bars: Experimental research and equivalent static analysisComposite Structures, 2019
- Compressive behavior of axially loaded circular hollow concrete columns reinforced with GFRP bars and spiralsConstruction and Building Materials, 2019
- Confinement Model for Concrete Columns Reinforced with GFRP SpiralsJournal of Composites for Construction, 2018
- Experimental investigation on the flexural-torsional buckling behavior of pultruded GFRP angle columnsThin-Walled Structures, 2018
- Mechanical behaviour of fully grouted GFRP rock bolts under the joint action of pre-tension load and blast dynamic loadTunnelling and Underground Space Technology, 2018
- Analytical buckling model for slender FRP-reinforced concrete columnsComposite Structures, 2017
- HYPERBOLIC PARABOLOID (HP) PANTOGRAPHIC STRUCTURE WITH LINER SCISSORSArchitecture, Civil Engineering, Environment, 2017
- Thermal cycling effects on the durability of a pultruded GFRP material for off-shore civil engineering structuresComposite Structures, 2016
- Repair of corroded and buckled short steel columns using concrete-filled GFRP jacketsConstruction and Building Materials, 2015