Mechanical properties of magnetic Fe‐based and Co‐based amorphous wires and microwires
- 3 April 2009
- journal article
- research article
- Published by Wiley in Physica Status Solidi (a)
- Vol. 206 (4) , 648-651
Abstract
In this paper we present measurements of the mechanical properties of magnetically soft Fe‐based and Co‐based conventional amorphous wires (CAW) and glass‐covered amorphous microwires (GCAW) in the as‐quenched state, before and after cold rolling, and after annealing for internal stresses relief. The tensile strength (σ) varies between 2000 MPa and 3400 MPa, strongly depending on CAW diameter and annealing temperature. The Young modulus (E) is following a descendant trend, decreasing with the diameter decrease. The increase of tensile strength (σ) and elongation (ε) values after cold‐rolling and post‐annealing is caused by the release of the internal stresses induced during the preparation. Tensile strengths up to 3900 MPa are achieved for Fe‐based GCAW, depending very strongly on the microwires diameter, but mostly on the glass cover thickness. σ reaches the maximum value of 3150 MPa for a Co‐based microwire having the glass cover of 9 μm and the total diameter of 43 μm, but increases even more after the glass removal (3350 MPa). This behaviour is attributed to the structural disorder and the specific magnetic domains structure in Fe‐based and Co‐based CAW and GCAW.Keywords
This publication has 20 references indexed in Scilit:
- Applications of amorphous microwires in sensing technologiesInternational Journal of Applied Electromagnetics and Mechanics, 2007
- Cobalt-based bulk glassy alloy with ultrahigh strength and soft magnetic propertiesNature Materials, 2003
- Optimal Parameters to Obtain Ultra–High-Strength Fe-Based Amorphous Alloy WiresMaterials and Manufacturing Processes, 2003
- Magnetic properties of Fe-based glass-coated microwiresJournal of Magnetism and Magnetic Materials, 1997
- Amorphous glass-covered magnetic wires for sensing applicationsSensors and Actuators A: Physical, 1997
- Amorphous glass-covered magnetic wires: Preparation, properties, applicationsProgress in Materials Science, 1996
- Comparative measurements of the field dependence of Young’s modulus and shear modulus in Fe-based amorphous wireJournal of Applied Physics, 1991
- Young's modulus of Fe-, Co-, Pd- and Pt-based amorphous wires produced by the in-rotating-water spinning methodJournal of Materials Science, 1983
- Fe–B and Fe–Si–B System Alloy Filaments Produced by Glass-Coated Melt SpinningTransactions of the Japan Institute of Metals, 1980
- Mechanical Properties of Amorphous Fe80P16C3B1 Filament Produced by Glass-Coated Melt SpinningTransactions of the Japan Institute of Metals, 1977