Dynamic characteristics and response reduction of the metal-touched type of base-isolator
Authors:
- 5 June 2006
- journal article
- research article
- Published by Hindawi Limited in Structural Control and Health Monitoring
- Vol. 14 (4) , 537-555
Abstract
In seismic isolation system for lightweight structures, sufficient effect is not acquired when laminated rubber bearings are used. It is because that the pressure on the surface is small. Since sliding base isolators expect the performance even when the pressure on the surface is small, sliding base isolators are used for lightweight structures. Generally, the frictional coefficients of sliding base isolators are assigned in the range 0.01–0.10. However, it is examined by three-dimensional finite element method that it is effective in the case of a big earthquake even if the frictional coefficients are 0.20. The purpose of this study is to examine the effect of base-isolated structures using sliding bearings by experimental and analytical methods. The experiment by horizontal earthquake excitation (modified JMA KOBE 1995) was conducted, and the frictional coefficient was identified. As a result, the values are identified around 0.20. By using the identified frictional coefficients, the response reduction effect of multi-degree-of-freedom system model is investigated by a simulation. The responses are reduced by in the range 50–80%. Copyright © 2006 John Wiley & Sons, Ltd.Keywords
This publication has 10 references indexed in Scilit:
- Seismic isolation of buildings with sliding concave foundation (SCF)Earthquake Engineering & Structural Dynamics, 2002
- VFPI: an isolation device for aseismic designEarthquake Engineering & Structural Dynamics, 2000
- Verification of Friction Model of Teflon Bearings under Triaxial LoadJournal of Structural Engineering, 1993
- Response of multi‐degree‐of‐freedom structures with sliding supportsEarthquake Engineering & Structural Dynamics, 1990
- 10. A Simple Pendulum Technique for Achieving Seismic IsolationEarthquake Spectra, 1990
- Teflon Bearings in Base Isolation I: TestingJournal of Structural Engineering, 1990
- Dynamics of resilient‐friction base isolator (R‐FBI)Earthquake Engineering & Structural Dynamics, 1987
- Response of Sliding Rigid Structure to Base ExcitationJournal of Engineering Mechanics, 1984
- Response of sliding structures to earthquake support motionEarthquake Engineering & Structural Dynamics, 1983
- Response of sliding structures to harmonic support motionEarthquake Engineering & Structural Dynamics, 1983