Post-irradiation bulk and radial thermal conductivity evolution of UO2 fuels
Authors:
- Janak TiwariJTJanak Tiwari
- Zilong HuaZHZilong Hua
- Fabiola CappiaFCFabiola Cappia
- Marat KhafizovMKMarat Khafizov
- David KamermanDKDavid Kamerman
- Tsvetoslav PavlovTPTsvetoslav Pavlov
Preprint
- 6 August 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
This study presents novel spatially resolved and bulk thermal conductivity measurements obtained from commercial high burnup UO2 fuel. Radial thermal diffusivity and conductivity profiles were obtained at room temperature using a spatial-domain thermoreflectance (SDTR) technique, revealing pronounced spatial heterogeneity driven by in-reactor operating conditions. Complementary bulk measurements were done via laser flash analysis from room temperature to 1273 K. Significant thermal conductivity recovery was observed during cooling cycle, indicating that the defects became mobile and annealed during the heating cycle. These experimental data are combined with existing microstructural characterization and established theory to deconvolute different mechanisms governing thermal transport during and post-irradiation in high burnup UO2. Lucuta model was used, which closely predicted both the radial and temperature dependences of conductivity, given that burnup, porosity, defects and self-irradiation effects are properly accounted for. The degradation of conductivity arises from the cumulative contributions from dissolved and precipitated fission product, porosity, and irradiation induced lattice defect. The radial conductivity profile at room temperature shows nearly constant nature at fuel-center to mid-radial regions, progressive decrease in mid-radial regions, and exponential decay in rim structure. At operating temperatures, dissolved fission products and porosity due to burnup primarily govern thermal transport of irradiated fuel pellets, while dissolved fission product and damage/defects due to radiation govern it during storage. The study contributes to nuclear community by providing critical PIEs, experimental data and fundamental insights into thermal transport of irradiated fuel samples.Keywords
This publication has 55 references indexed in Scilit:
- Using Coupled Mesoscale Experiments and Simulations to Investigate High Burn-Up Oxide Fuel Thermal ConductivityJOM, 2014
- Phonon scattering and thermal resistance due to grain boundariesInternational Journal of Thermophysics, 1994
- Microstructure evolution during irradiationJournal of Nuclear Materials, 1994
- Dynamics of irradiation-induced grain subdivision and swelling in U3Si2 and UO2 fuelsJournal of Nuclear Materials, 1994
- TRANSURANUS: a fuel rod analysis code ready for useJournal of Nuclear Materials, 1992
- Development and characteristics of the rim region in high burnup UO2 fuel pelletsJournal of Nuclear Materials, 1992
- A recommendation for the thermal conductivity of UO2Journal of Nuclear Materials, 1989
- The chemical state of the fission products in oxide fuelsJournal of Nuclear Materials, 1985
- Irradiation behaviour of nuclear fuelsPramana, 1985
- The effect of gadolinium content on the thermal conductivity of near-stoichiometric (U,Gd)O2 solid solutionsJournal of Nuclear Materials, 1982