High-Frequency Response Functions for Composite Plate Monitoring with Ultrasonic Validation
Authors:
- 1 November 2005
- journal article
- research article
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 43 (11) , 2431-2437
Abstract
In this study, frequency response functions (FRF) measured by piezoelectric Macro-Fiber Composite (MFC) actuators/sensors are used to detect subsurface delamination in a composite plate. The plate is impacted to seed damage in the form of ply delamination. Then, the MFC- based active-sensing system exerts an excitation into the plate, and measures the subsequent responses. Traditional piezoceramic materials are also mounted in comparable locations on the plate to compare their performances. FRF and damage indicator features are derived from the measured signals and used to assess the condition of the plate. Validation of the delamination is completed using an ultrasonic C-scan method. The effective area of observed damage is well correlated to the damage indicator feature.Keywords
This publication has 12 references indexed in Scilit:
- Laser Vibrometry Based Detection of Delaminations in Glass/Epoxy CompositesJournal of Vibration and Acoustics, 2004
- Detection and monitoring of hidden fatigue crack growth using a built-in piezoelectric sensor/actuator network: II. Validation using riveted joints and repair patchesSmart Materials and Structures, 2004
- An investigation into the performance of macro-fiber composites for sensing and structural vibration applicationsMechanical Systems and Signal Processing, 2004
- Wavelet-based active sensing for delamination detection in composite structuresSmart Materials and Structures, 2003
- Damage detection in composite materials using Lamb wave methodsSmart Materials and Structures, 2002
- Damage detection in composite materials using frequency response methodsComposites Part B: Engineering, 2002
- Damage diagnosis using time series analysis of vibration signalsSmart Materials and Structures, 2001
- VIBRATION-BASED MODEL-DEPENDENT DAMAGE (DELAMINATION) IDENTIFICATION AND HEALTH MONITORING FOR COMPOSITE STRUCTURES — A REVIEWJournal of Sound and Vibration, 2000
- DELAMINATION DETECTION IN COMPOSITE LAMINATES FROM VARIATIONS OF THEIR MODAL CHARACTERISTICSJournal of Sound and Vibration, 1999
- STRUCTURAL HEALTH MONITORING USING TRANSMITTANCE FUNCTIONSMechanical Systems and Signal Processing, 1999