A Static Model for Scratches Generated during Aluminum Chemical-Mechanical Polishing Process: Orbital Technology
Authors:
- Lei ZhongLZLei Zhong
- Jerry YangJYJerry Yang
- Karey HollandKHKarey Holland
- Joost GrillaertJGJoost Grillaert
- Katia DevriendKDKatia Devriend
- Nancy HeylenNHNancy Heylen
- Marc MeurisMMMarc Meuris
- 1 April 1999
- journal article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 38 (4R)
Abstract
In this work, we explored the analogy between the scratches formed on a polished surface and the indentation used in the material hardness testing. A static hardness model proposed on the basis of this analogy is able to explain quite successfully the experimental results such as the depth of the scratches and the vulnerability of the aluminum film, under the assumption that the particle penetration is facilitated by a stress concentration. It is suggested that the stress redistribution needed might be caused by the incompleteness of pad-wafer contact due to the pad surface roughness. We also found that a scratch in its plane-view is shaped by the kinetic equation governing the pad-wafer relative movement, which is deemed as a further evidence for our hypothesis that a scratch is generated by a protrusion on the pad holding a particle against the wafer and forcing it into the film with the aid of the stress concentration.Keywords
This publication has 3 references indexed in Scilit:
- Tungsten Chemical Mechanical PolishingJournal of the Electrochemical Society, 1998
- Chemical‐Mechanical Polishing for Fabricating Patterned W Metal Features as Chip InterconnectsJournal of the Electrochemical Society, 1991
- Chemical processes in glass polishingJournal of Non-Crystalline Solids, 1990