Influence of Temperature Distribution in Combustion Chamber on Coke Cake Discharging Behavior
Authors:
Open Access
- 1 January 2018
- journal article
- research article
- Published by Iron and Steel Institute of Japan in ISIJ International
- Vol. 58 (4) , 633-641
Abstract
To achieve stable operation of coke oven batteries, a numerical model for estimating the clearance between the coke cake and the coke oven wall was developed. The influence of the temperature distribution in the combustion chamber on coke cake contraction was investigated by using the developed model. As a result, the following findings were obtained.1) A temperature decrease on the coke side (CS) results in a larger clearance decrease at the end of the coke chamber compared with a temperature decrease on the machine side (MS).2) The clearance decrease at the end of CS causes a higher pushing load of coke cake. Therefore, improvement of the CS flue gas temperature is particularly important for reducing the pushing force of the coke cake.Keywords
This publication has 14 references indexed in Scilit:
- Effect of Coke Fissure on Clearance between Coke Cake and Oven WallJournal of the Japan Institute of Energy, 2011
- Research Prospect on Coke Reactivity aiming at Low RAR Blast Furnace OperationTetsu-to-Hagane, 2010
- Influence of Inert Materials on Contractile Behavior and Fissure Formation of CokeTetsu-to-Hagane, 2007
- Control of Peripheral Gas Flow and Design of Burden Quality for Low Reducing Agent Rate Operation of Blast FurnaceTetsu-to-Hagane, 2006
- Coking Pressure and Coke Shrinkage in Coke OvenTetsu-to-Hagane, 1999
- Mathematical Modelling of Clearance between Wall of Coke Oven and Coke CakeTetsu-to-Hagane, 1995
- Estimation of thermal stress at an early step of coking process.KAGAKU KOGAKU RONBUNSHU, 1987
- Effective thermal conductivity of packed bed of binary mixture of coal during carbonization.KAGAKU KOGAKU RONBUNSHU, 1985
- New Simulation Model for Coke Oven and Some ApplicationsTetsu-to-Hagane, 1982
- Berechnung der Strahlung von Wasserdampf und KohlendioxidChemie Ingenieur Technik, 1970