Detection and quantification of diameter reduction due to corrosion in reinforcing steel bars
Authors:
- 27 March 2015
- journal article
- research article
- Published by SAGE Publications in Structural Health Monitoring
- Vol. 14 (5) , 532-543
Abstract
Guided wave–based techniques are becoming popular for damage detection in pipes, rods, and plates. For monitoring reinforced concrete beams, the longitudinal guided wave is excited and recorded after its transmission through the reinforcing steel bar for estimating its corrosion level. Recorded signal amplitude is affected by the corrosion level. Thus, the corrosion level is estimated from the transmitted wave amplitude. Instead of investigating the amplitude of the transmitted guided waves, the differential time-of-flight of the propagating wave modes is recorded in this article. The differential time-of-flight is obtained from the time–frequency representations of the recorded transient signals and from the high temporal resolution using the cross-correlation technique. It is observed that the corrosion level can be quantified from the change in time-of-flight of the L(0,1) mode. The guided wave modes are experimentally generated, recorded, and compared with the theoretical dispersion curves to identify different modes and select the most efficient mode for quantifying the corrosion level. Unlike the recorded signal strength, the time-of-flight is not influenced by the bonding condition between the sensors and the specimen; therefore, the time-of-flight-based corrosion-monitoring technique is less influenced by the sensor bonding condition. This investigation is necessary because most investigators have studied the effect of corrosion on the recorded signal strength instead of its time-of-flight.Keywords
This publication has 22 references indexed in Scilit:
- On sequencing the feature extraction techniques for online damage characterizationJournal of Intelligent Material Systems and Structures, 2012
- Monitoring Corrosion of Rebar Embedded in Mortar Using High-Frequency Guided Ultrasonic WavesJournal of Engineering Mechanics, 2009
- Smart aggregates: multi-functional sensors for concrete structures—a tutorial and a reviewSmart Materials and Structures, 2008
- A Window Width Optimized S-TransformEURASIP Journal on Advances in Signal Processing, 2007
- Debond Detection using Embedded Piezoelectric Elements for Reinforced Concrete Structures - Part II: Analysis and AlgorithmStructural Health Monitoring, 2006
- Debond Detection using Embedded Piezoelectric Elements in Reinforced Concrete Structures - Part I: ExperimentStructural Health Monitoring, 2006
- Elimination of interference terms of the discrete Wigner distribution using nonlinear filteringIEEE Transactions on Signal Processing, 2000
- Localization of the complex spectrum: the S transformIEEE Transactions on Signal Processing, 1996
- Three-Dimensional Investigation of the Propagation of Waves in Hollow Circular Cylinders. II. Numerical ResultsThe Journal of the Acoustical Society of America, 1959
- Three-Dimensional Investigation of the Propagation of Waves in Hollow Circular Cylinders. I. Analytical FoundationThe Journal of the Acoustical Society of America, 1959