Role of Urea on the Physico-Mechanical and Degradable Properties of Mercerized and Acid Hydrolyzed Coir (Cocos nucifera) Fibers Photocured with 1,6-Hexanediol Diacylate
Authors:
- 1 June 2005
- journal article
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 44 (5) , 1003-1023
Abstract
Coir fibers were modified with 1,6-hexanediol diacrylate (HDDA) by using ultraviolet (UV) radiation. Concentration of HDDA, soaking time, and radiation dose were optimized and found to be 30% HDDA in methanol along with photoinitiator Irgacure-500 (2%) and 120 min of soaking time the better performance registered as the optimum conditions, where polymer loading (PL) was 17% and tensile strength (TS) was 50%. Urea of different concentrations (0.5–2%) was incorporated with 30% HDDA to monitor its effect on the properties and 1% urea produced the enhanced PL (25%) and TS (82%). For the improvement of the properties, the fibers were subjected to surface treatment with alkali (5% potassium hydroxide) at various mercerizing times in hot and normal conditions. Among all the mercerized fibers, fibers treated with hot alkali for 6 h and cured under optimized condition demonstrated the maximum enhancement of PL (35.5%) and TS (130%). The fibers were also subjected to acid hydrolysis for different times wit...Keywords
This publication has 17 references indexed in Scilit:
- Surface modification of jute and its influence on performance of biodegradable jute-fabric/Biopol compositesComposites Science and Technology, 2000
- In situ jute yarn composite with HEMA via UV radiationJournal of Applied Polymer Science, 1999
- The effect of additives on the enhancement of methyl methacrylate grafting to cellulose in the presence of UV and ionising radiationRadiation Physics and Chemistry, 1997
- Study on jute material with urethane acrylate by U.V. CuringRadiation Physics and Chemistry, 1997
- Improvement of Jute Yarn Through In Situ Copolymerization by UV RadiationPolymer-Plastics Technology and Engineering, 1997
- Radiation-Induced Jute–Plastic Composite: Preparation and IR StudiesPolymer-Plastics Technology and Engineering, 1997
- Degradable jute plastic compositesPolymer Degradation and Stability, 1997
- Cellulose fiber‐polyester composites with reduced water sensitivity (1)—chemical treatment and mechanical propertiesPolymer Composites, 1987
- Radiation-induced reactions with cellulose. IX. Copolymerization with styrene using a pre-irradiation procedure and the effect of additives on the grafting reactionAustralian Journal of Chemistry, 1971
- Electronic absorption spectra for copper(II) polyamine complexesAustralian Journal of Chemistry, 1970