Ignition Temperature and Surface Emissivity of Heterogeneous Loosely Packed Materials from Pyrometric Measurements
Open Access
- 1 January 2014
- journal article
- Published by International Association for Fire Safety Science in Fire Safety Science
- Vol. 11, 262-275
Abstract
This paper reports the ignition temperature and emissivity of heterogeneous materials characterised by high void fraction of between 0.92 and 0.94 and composed of loose particles of shredded grass and paper, planed wood, shredded plastic bags, as well as sugar and bread, with about 95 % of the particles (by mass) of less than 50 mm in size. These materials reflect a typical composition and void fraction of so-called refusederived fuels (RDF), which are obtained from municipal solid waste, then densified and combusted for energy recovery. An infrared pyrometer, with a spectral response range of 8 to 14 µm, recorded the surface temperature of the surrogate RDF, prior to the onset of the flaming combustion, in a stand alone mass loss calorimeter operated at 20 and 45 kW m-2. The overlapping spectral ranges of the pyrometer and the radiator heater necessitated the development of a practical methodology to obtain the actual surface temperature from the apparent measurements, which included the effect of the reflected radiation. In addition to surface temperatures (292-325 °C for 20 kW m-2 and 250-294 °C for 45 kW m-2), in this contribution, we estimate the actual emissivities (0.95-0.98) of the materials from the intensity of the reflected radiation.Keywords
This publication has 13 references indexed in Scilit:
- An alternative way for the ignition times for solids with radiation absorption in‐depth by simple asymptotic solutionsFire and Materials, 2011
- Numerical simulations of polymer pyrolysis rate: Effect of property variationsFire and Materials, 2010
- Absorption of thermal energy in PMMA by in-depth radiationFire Safety Journal, 2009
- Fire properties of surrogate refuse-derived fuelsFire and Materials, 2005
- Propagation of the ignition front in beds of wood particlesCombustion and Flame, 2000
- Material fire properties and predictions for thermoplasticsFire Safety Journal, 1996
- An approximate integral model for the burning rate of a thermoplastic‐like materialFire and Materials, 1994
- Surface temperature measurements on burning wood specimens in the Cone Calorimeter and the effect of grain orientationFire and Materials, 1993
- Burning rate of solid wood measured in a heat release rate calorimeterFire and Materials, 1992
- Effects of external radiant flux and ambient oxygen concentration on nonflaming gasification rates and evolved products of white pineCombustion and Flame, 1987