Sensing Mechanism of Potentiometric Gas Sensors Based on Stabilized Zirconia with Oxide Electrodes
Authors:
- 1 January 2004
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 151 (5) , H133-H127
Abstract
LaGaO3LaGaO3 (LSGM) based solid electrolyte coupled with suitable electrodes was demonstrated to be a highly sensitive hydrocarbon (C3H6)(C3H6) sensor in the temperature range of 523-673 K. Sensors were studied in the amperometric mode. Keeping Pt as the active electrode, the various inactive electrode materials were studied. It was seen that La0.5Sr0.5CoO3La0.5Sr0.5CoO3 (LSC 55) gave the best sensitivity among the studied LaCoO3LaCoO3 catalysts. Furthermore, it was found that the performance of the sensor with La0.5Sr0.5MnO3La0.5Sr0.5MnO3 (LSM 55) showed the highest sensitivity (≈600 μA/decade at 623 K) among all the investigated perovskite oxides for an inactive electrode. The sensitivity of all the sensors was fast, reversible, and the current linearly increased with increasing C3H6C3H6 concentration. Over a broad range of oxygen concentration, the C3H6C3H6 sensitivity was found unaltered. The thickness of the LaGaO3LaGaO3 electrolyte played an important role for increasing the sensitivity. The measured value of the open circuit potential in the potentiometric mode was very small; but it confirmed the development of mixed potential between the two electrodes which palyed the key role for changing current in the present amperometric sensor. © 2004 The Electrochemical Society. All rights reserved.Keywords
This publication has 34 references indexed in Scilit:
- Electrochemical NO2 Sensors with WO3 Electrodes for High Temperature Applications.Journal of the Ceramic Society of Japan, 2002
- Solid electrolyte CO2 sensor using NASICON and perovskite-type oxide electrodeSensors and Actuators B: Chemical, 2000
- Solid state ceramic gas sensors based on interfacing ionic conductors with semiconducting oxidesJournal of the European Ceramic Society, 2000
- Thick-Film Gas Sensors Based on Nano-Sized Semiconducting Oxide PowdersMRS Bulletin, 1999
- Gas Sensors Using Solid ElectrolytesMRS Bulletin, 1999
- Potentiometric Gas Sensors for Oxidic GasesJournal of Electroceramics, 1998
- Solid electrolyte NOx sensor using pyrochlore-type oxide electrode1Devoted to the late Dr Tetsuro Seiyama.1Sensors and Actuators B: Chemical, 1998
- Solid ionic conductor/semiconductor junctions for chemical sensorsApplied Physics A, 1993
- Development of high-performance solid-electrolyte sensors for NO and NO2Sensors and Actuators B: Chemical, 1993
- Physical Principles Governing Nonideal Behavior of the Zirconia Oxygen SensorJournal of the Electrochemical Society, 1977