Ultrasonic tomographic imaging of temperature and flow fields in gases using air-coupled capacitance transducers
- 1 December 1998
- journal article
- research article
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 104 (6) , 3446-3455
Abstract
A pair of air-coupled ultrasonic capacitance transducers with polished metal backplates have been used to image temperature and flow fields in gases using ultrasonic tomography. Using a filtered back-projection algorithm and a difference technique, cross-sectional images of spatially variant changes in ultrasonic attenuation and slowness caused by the presence of temperature and flow fields were reconstructed. Temperature fields were produced in air by a commercial soldering iron, and the subsequent images of slowness variations used to reconstruct the air temperature at various heights above the iron. When compared to measurements made with a thermocouple, the tomographically reconstructed temperatures were found to be accurate to within 5%. The technique was also able to resolve multiple heat sources within the scan area. Attenuation and velocity images were likewise produced for flow fields created by an air-jet from a 1-mm-diam nozzle, at both 90 and 45 degrees to the scanning plane. The fact that temperature and flow fields can be measured in a gas without the need to insert any measuring devices into the image region is an advantage that may have many useful applications.Keywords
This publication has 24 references indexed in Scilit:
- Lamb wave tomography of advanced composite laminates containing damageUltrasonics, 1994
- Simultaneous acoustic emission and ultrasonic tomographic imaging in anisotropic polymer composite materialThe Journal of the Acoustical Society of America, 1993
- Ultrasonic tomography using scanned contact transducersThe Journal of the Acoustical Society of America, 1993
- Stress dependence of the acoustic properties of Zr-2.5 wt% Nb alloyUltrasonics, 1993
- Diagnostic measurements in capacitive transducersUltrasonics, 1993
- Lamb-wave tomography using non-contact transductionUltrasonics, 1993
- Ultrasonic tomography of metals using noncontact transductionThe Journal of the Acoustical Society of America, 1989
- Application of ultrasonic computed tomography to nondestructive inspection of SiO2 ingot material qualitiesThe Journal of the Acoustical Society of America, 1988
- Nondestructive Inspection of a Wooden Pole Using Ultrasonic Computed TomographyIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1986
- Computerized ultrasonic tomography for testing solid propellant rocket motorsUltrasonics, 1983