The Mathematical Model of Curve-Face Gear and Time-Varying Meshing Characteristics of Compound Transmission
Open Access
- 18 September 2021
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 11 (18) , 8706
Abstract
The curve-face gear pair is a new type of gear pair with variable transmission ratio for spatial finite helical motion. In this paper, mathematical models of a new developed curve-face gear were simplified and obtained directly by the standard shaper. The subsequent studies on the curve-face gear compound transmission characteristics were further analyzed by the combinations of the principle of space gearing and screw theory. Firstly, the conjugate tooth surface geometry as well the point contact traces of curve-face gears were derived. Secondly, the geometric relationships between gear pair and the corresponding meshing characteristics were evaluated by several basic geometric elements, including instantaneous screw, axodes, striction curve, and conjugate pitch surface. Based on that analysis, it was found that the tooth contact normal was reciprocal to the instantaneous twist, which demonstrated that the conjugate motion with the desired transmission ratio could be realized in current curve-face gear compound transmission. Moreover, the time-varying slip characteristics of the curve-face gear pair were also revealed, that is, rolling and sliding action coexist at all contact on the tooth surfaces. In brief, this work provided the theoretical basis for following researches on machining curve-face gear with standard shaper.Keywords
Funding Information
- National Natural Science Foundation of China (51675060)
- Equipment Pre-Research Project (3010519404)
- Chongqing University Graduate Student Research Innovation Project (CYB19011)
This publication has 40 references indexed in Scilit:
- Contact Characteristics of Circular-Arc Curvilinear Tooth Gear DrivesJournal of Mechanical Design, 2009
- Tooth profile generation and analysis of oval gears with circular-arc teethMechanism and Machine Theory, 2009
- On Spatial Euler–Savary Equations for EnvelopesJournal of Mechanical Design, 2006
- Computerized Modeling and Simulation of Spiral Bevel and Hypoid Gears Manufactured by Gleason Face Hobbing ProcessJournal of Mechanical Design, 2005
- Tooth profile design for the manufacture of helical gear sets with small numbers of teethInternational Journal of Machine Tools and Manufacture, 2005
- Contact characteristics of cylindrical gears with curvilinear shaped teethMechanism and Machine Theory, 2004
- On the Three Laws of GearingJournal of Mechanical Design, 2002
- Computerized integrated approach for design and stress analysis of spiral bevel gearsComputer Methods in Applied Mechanics and Engineering, 2002
- Deviation-Function Based Pitch Curve Modification for Conjugate Pair DesignJournal of Mechanical Design, 1999
- Design and Geometry of Face-Gear DrivesJournal of Mechanical Design, 1992