Hybrid Hollow Microlattices With Unique Combination of Stiffness and Damping
Open Access
- 14 February 2018
- journal article
- research article
- Published by ASME International in Journal of Engineering Materials and Technology
- Vol. 140 (3)
Abstract
Hybrid micro-architected materials with unique combinations of high stiffness, high damping, and low density are presented. We demonstrate a scalable manufacturing process to fabricate hollow microlattices with a sandwich wall architecture comprising an elastomeric core and metallic skins. In this configuration, the metallic skins provide stiffness and strength, whereas the elastomeric core provides constrained-layer damping. This damping mechanism is effective under any strain amplitude, and at any relative density, in stark contrast with the structural damping mechanism exhibited by ultralight metallic or ceramic architected materials, which requires large strain and densities lower than a fraction of a percent. We present an analytical model for stiffness and constrained-layer damping of hybrid hollow microlattices, and verify it with finite elements simulations and experimental measurements. Subsequently, this model is adopted in optimal design studies to identify hybrid microlattice geometries which provide ideal combinations of high stiffness and damping and low density. Finally, a previously derived analytical model for structural damping of ultralight metallic microlattices is extended to hybrid lattices and used to show that ultralight hybrid designs are more efficient than purely metallic ones.Keywords
Funding Information
- Office of Naval Research (# N000141110884.)
This publication has 35 references indexed in Scilit:
- Microlattices as architected thin films: Analysis of mechanical properties and high strain elastic recoveryAPL Materials, 2013
- Compressive strength of hollow microlattices: Experimental characterization, modeling, and optimal designJournal of Materials Research, 2013
- Fatigue design of a mechanically biocompatible lattice for a proof-of-concept femoral stemJournal of the Mechanical Behavior of Biomedical Materials, 2013
- Biomaterials in orthopaedicsJournal of The Royal Society Interface, 2008
- Micro-scale truss structures with three-fold and six-fold symmetry formed from self-propagating polymer waveguidesActa Materialia, 2008
- Compression behavior of micro-scale truss structures formed from self-propagating polymer waveguidesActa Materialia, 2007
- Micro‐scale Truss Structures formed from Self‐Propagating Photopolymer WaveguidesAdvanced Materials, 2007
- Optimal active cooling performance of metallic sandwich panels with prismatic coresInternational Journal of Heat and Mass Transfer, 2006
- Recent applications of viscoelastic damping for noise control in automobiles and commercial airplanesJournal of Sound and Vibration, 2003
- Damping properties of aluminium foamsMaterials Science and Engineering: A, 1996