Thermal Comparison of Conventional and Conformal Cooling Channel Designs for a Non-Constant Thickness Screw Cap
Authors:
- Eric DimlaEDEric Dimla
- Josep Rull-TrinidadJRJosep Rull-Trinidad
- Andres Amador Garcia-GranadaAGAndres Amador Garcia-Granada
- Guillermo ReyesGRGuillermo Reyes
- 1 January 2018
- journal article
- Published by Korean Society of Precision Engineering in Journal of the Korean Society for Precision Engineering
- Vol. 35 (1) , 95-101
Abstract
Complex parts are manufactured with high production rates using plastic injection. Defects in injection moulded parts are typically caused by non-uniform cooling. The design of cooling channels is a key step in the mould tool design process. Laser sintering allows for the direct fabrication at reasonable price, complex 3D tools with integrated cooling channels without the need of fixtures. This technique allows the designer to optimise the position of cooling channels relative to the heat source. This paper presents a simulation study for a non-constant thickness threaded screw cap. Results comparing conventional to conformal cooling channel show that the range between the highest and the lowest part surface temperatures is reduced by 18.8%. On the other hand, there is only a decrease of 3.9% for the maximum temperature in the interior of the threaded screw cap. Conformal cooling using laser sintering in tool manufacturing achieves an improved heat transfer leading to a better part quality.Keywords
This publication has 8 references indexed in Scilit:
- Optimal cooling design in injection moulding process – A new approach based on morphological surfacesApplied Thermal Engineering, 2013
- Design and simulation-based optimization of cooling channels for plastic injection mold2012
- Automatic design of conformal cooling circuits for rapid toolingComputer-Aided Design, 2011
- Visibility-based conformal cooling channel generation for rapid toolingComputer-Aided Design, 2011
- A scaffolding architecture for conformal cooling design in rapid plastic injection mouldingThe International Journal of Advanced Manufacturing Technology, 2006
- A feature-based approach to injection mould cooling system designComputer-Aided Design, 2001
- The design of conformal cooling channels in injection molding toolingPolymer Engineering & Science, 2001
- Production of injection molding tooling with conformal cooling channels using the three dimensional printing processPolymer Engineering & Science, 2000