Development and testing of a soot particle concentration estimator using Lagrangian post-processing
Authors:
Open Access
- 23 November 2017
- journal article
- research article
- Published by Taylor & Francis in Engineering Applications of Computational Fluid Mechanics
- Vol. 12 (1) , 236-249
Abstract
Soot emissions from combustion devices are known to have harmful effects on the environment and human health. As the transportation industry continues to expand, the development of techniques to reduce soot emissions remains a significant goal of researchers and industry. In order for current soot modeling techniques to be reliably accurate, they must incur an intractably high computational cost. This project leverages existing knowledge in soot modeling and soot formation fundamentals to develop a stand-alone, computationally inexpensive soot concentration estimator to be linked to Computational Fluid Dynamics simulations as a post-processor. Preliminary development and testing of the estimator is presented here for laminar flames. As soot properties cannot be determined by local conditions, the estimator consists of a library generated using the hystereses of soot-containing fluid parcels, which relates soot concentration to the aggregated gas-phase environment histories to which a fluid parcel has been exposed. The estimator can be used to relate soot concentration to computed parcel hystereses through interpolation techniques. The estimator shows the potential ability to produce accurate results with very low computational cost in laminar coflow diffusion flames. Results also show that as flame data representing a broader set of conditions (temperature, mixture fraction, residence time, etc.) are added to the library, the estimator becomes applicable to a wider range of flames.Keywords
Funding Information
- the Natural Sciences and Engineering Research Council of Canada
This publication has 46 references indexed in Scilit:
- Effects of non-unity Lewis number of gas-phase species in turbulent nonpremixed sooting flamesCombustion and Flame, 2016
- Investigation of turbulence model and numerical scheme combinations for practical finite-volume large eddy simulationsEngineering Applications of Computational Fluid Mechanics, 2015
- Soot formation with C1 and C2 fuels using an improved chemical mechanism for PAH growthCombustion and Flame, 2014
- Numerical investigation of soot formation mechanisms in partially-premixed ethylene–air co-flow flamesCombustion and Flame, 2012
- Application of an enhanced PAH growth model to soot formation in a laminar coflow ethylene/air diffusion flameCombustion and Flame, 2011
- Distributed-memory parallel computation of a forced, time-dependent, sooting, ethylene/air coflow diffusion flameCombustion Theory and Modelling, 2009
- An Elementary Framework for Judging the Cardiovascular Toxicity of Carbon Soot: Experiences from an Occupational Health Survey of Diamond Industry WorkersCardiovascular Toxicology, 2009
- Modelling soot formation in a premixed flame using an aromatic-site soot model and an improved oxidation rateProceedings of the Combustion Institute, 2009
- Comparison of Soot Growth and Oxidation in Smoking and Non–Smoking Ethylene Diffusion FlamesCombustion Science and Technology, 1989
- A Fundamentally-Based Stochastic Mixing Model Method for Predicting NO and Soot Emissions from Direct Injection Diesel EnginesCombustion Science and Technology, 1988