Optimization of Hemp Bast Microfiber Production Using Response Surface Modelling
Open Access
Abstract
Non-wood biomass is particularly attractive as a cellulose source because of the lower lignin content. However, optimal cellulose extraction conditions are required as lignin content varies between plant sources. Further, the use of organic acids in place of harsh mineral acids is of interest in “greening” the cellulose production process. This study sought to establish optimum parameters for the extraction of cellulose microfibers (CMFs) from hemp (Cannabis sativa) biomass, using maleic and formic acids. Hemp fibers were pre-treated in NaOH (4 wt%) and aqueous chlorite in acetate buffer before ultrasonic treatment to break down bundles. The CMFs produced were compared with those generated from sulfuric acid hydrolysis. Response surface methodology (RSM) was used to determine combinations of three processing conditions, including acid concentration (45–64%), hydrolysis time (30–90 min), and temperature (45–65 °C). A central composite design (RSM-CCD) model with 21 experimental runs was optimized using MODDE 13.1 software. The model suitably described the data (R2 = 0.99; R2adj = 0.96). Microfibers with an average width of 6.91 µm, crystallinity range 40–75%, and good thermal stability were produced. Crystallinity was influenced by all three factors. The optimal crystallinity predicted by the model was 83.21%, which could be achieved using formic acid 62 wt% formic acid, 36 min hydrolysis time, and 47 °C hydrolysis temperature. These conditions resulted in a crystallinity degree of 82%. These data suggest formic acid can be used as an alternative to sulfuric acid for synthesis of cellulose microfibers from biodegradable hemp waste fibers.Keywords
Funding Information
- National Research Foundation (123493, FLR/R1/190087)
- Royal Society (123493, FLR/R1/190087)
This publication has 67 references indexed in Scilit:
- Cellulose nanocrystal isolation from tomato peels and assembled nanofibersCarbohydrate Polymers, 2015
- Cellulose nanofibers produced from banana peel by chemical and enzymatic treatmentLWT, 2014
- Catalytic Extraction of Microcrystalline Cellulose (MCC) from Elaeis guineensis using Central Composite Design (CCD)BioResources, 2014
- Isolation and characterization of cellulose nanofibrils from Helicteres isora plantIndustrial Crops and Products, 2014
- Preparation and characterization of cellulose nanofibers from de-pectinated sugar beet pulpCarbohydrate Polymers, 2014
- Preparation and characterization of nanocrystalline cellulose via low-intensity ultrasonic-assisted sulfuric acid hydrolysisCellulose, 2013
- Isolation and characterization of cellulose nanofibers from banana peelsCellulose, 2013
- Use of cellulose fibers from hemp core in fiber-cement production. Effect on flocculation, retention, drainage and product propertiesIndustrial Crops and Products, 2012
- Cellulose microfibres produced from banana plant wastes: Isolation and characterizationCarbohydrate Polymers, 2010
- Application of the central composite design and response surface methodology to the advanced treatment of olive oil processing wastewater using Fenton's peroxidationJournal of Hazardous Materials, 2005