Desulfurization of Iron Ores: Processes and Challenges
- 24 May 2018
- journal article
- review article
- Published by Wiley in Steel Research International
- Vol. 89 (7)
Abstract
Various studies have been increasingly performed on the reduction of sulfur content of iron ores and concentrates. The presence of sulfur in these materials causes technical problems in steel and alloys and environmental issues in the sintering of iron ore process. The achievement of higher sulfur removal rates has been an important goal since the development of sulfur removal techniques. In this research, an effort is made to separately introduce the various processes, industrial practices, and fundamental research activities to remove sulfur from iron ores, concentrates, or roasted iron ores. In this way, the optimized condition and latest innovations in sulfur removal using flotation are reviewed and the development of leaching and bioleaching techniques for sulfur reduction is introduced; following the development of thermal decomposition, physical separation methods, and magnetic separation technique are discussed. In each section, a brief introduction of fundamentals for the sulfur removal techniques and their potential advantages for sulfur removal are described and challenges for each technique are presented. Finally, the techniques are compared from technical, economic and environmental viewpoints, and future trends in desulfurization of iron ores are presented.Keywords
Funding Information
- Shahid Bahonar University of Kerman
This publication has 88 references indexed in Scilit:
- Froth Flotation of Iron OresInternational Journal of Mining Engineering and Mineral Processing, 2012
- Effect of Humidification Water on Semi-dry Flue Gas DesulfurizationEnergy Procedia, 2012
- The formulation and use of mixed collectors in sulphide flotationMinerals Engineering, 2010
- Mechanisms in oxidation and sintering of magnetite iron ore green pelletsPowder Technology, 2008
- The role of copper and lead in the activation of pyrite in xanthate and non-xanthate systemsMinerals Engineering, 2006
- Reagents in iron ores flotationMinerals Engineering, 2005
- Quantifying hydrophobicity of pyrite after copper activation and DTPI addition under electrochemically controlled conditionsMinerals Engineering, 2004
- Review of the effect of grinding media on flotation of sulphide mineralsMinerals Engineering, 1991
- Similarities between lime and limestone in wet—dry scrubbingChemical Engineering and Processing - Process Intensification, 1984
- Reactions of Iron Pyrite: Its Thermal Decomposition, Reduction by Hydrogen and Air OxidationJournal of the American Chemical Society, 1947