Creep and Fatigue at Elevated Temperatures. Shear Correction Factors in Creep-Damage Analysis of Beams, Plates and Shells.
- 1 January 2002
- journal article
- Published by Japan Society of Mechanical Engineers in JSME International Journal Series A
- Vol. 45 (1) , 77-83
Abstract
Modern design rules for thin-walled structures which operate at elevated temperatures are based on the demand that the creep and may be the damage behaviour should be taken into account. In the last four decades various models including the scalar or tensor valued hardening and damage variables are established. These models reflect the influence of the deformation or the damage induced anisotropy on the creep response. One problem in creep analysis of thin-walled structures is the selection of the structural mechanics model which has to be adequate to the choice of the constitutive equations. Considering complex loading conditions the structural mechanics model has to reflect for instance the different constitutive behaviour in tension and compression. Below the applicability of classical engineering models for beams, plates and shells to the creep-damage analysis is discussed. It will be shown that a first improvement of the classical approach can be given within the assumptions of the first order shear deformation theory. Based on the beam equations we demonstrate that the shear correction factors have to be modified within the time-step analysis.Keywords
This publication has 16 references indexed in Scilit:
- Shear correction factors in Timoshenko's beam theory for arbitrary shaped cross-sectionsComputational Mechanics, 2001
- Shear Coefficients for Timoshenko Beam TheoryJournal of Applied Mechanics, 2000
- On the accuracy of creep-damage predictions in thinwalled structures using the finite element methodComputational Mechanics, 2000
- On the determination of transverse shear stiffnesses of orthotropic platesZeitschrift für angewandte Mathematik und Physik, 2000
- Relationships between bending solutions of classical and shear deformation beam theoriesInternational Journal of Solids and Structures, 1997
- Geometrically nonlinear bending of thin-walled shells and plates under creep-damage conditionsArchive of Applied Mechanics, 1997
- A note on the boundary layer in the sixth‐order theory of transverse bending of anisotropic shear‐deformable elastic platesCommunications in Applied Numerical Methods, 1990
- Materialgleichungen zur beschreibung des primären kriechverhaltens innendruckbeanspruchter zylinderschalen aus isotropem werkstoffArchive of Applied Mechanics, 1989
- The Creep of Moderately Thick Shells of Revolution Under Axisymmetrical Load1981
- Constitutive equations for creep ruptureActa Metallurgica, 1977