Effect of Printing Parameters on Mechanical Performance of Material-Extrusion 3D-Printed PEEK Specimens at the Point-of-Care
Open Access
- 17 January 2023
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 13 (3) , 1230
Abstract
Additive manufacturing (AM) of polyetheretherketone (PEEK) biomaterials using the material-extrusion (MEX) method has been studied for years. Because of the challenging manufacturing process, precisely controlling printing parameters is crucial. This study aimed to investigate the effects of printing parameters such as orientation and position of printing on mechanical properties. Thus, 34 samples were printed using PEEK filament and the MEX process. Samples were divided into two main groups (A,B) according to their printing orientations (A: groups 1–3) and positions on the build plate (B: groups 4–8). Mechanical tensile tests were performed to evaluate the effects of different printing orientations and positions on mechanical properties. The means of the tensile modulus in samples 3D-printed in XY (group 1), XZ (group 2), and ZX (group 3) orientations were not significantly different (p-value = 0.063). Groups 1 and 2 had smaller distributions than group 3 in the means of tensile strength. The t-test showed that the overall means of the measurements in groups 4–8 did not differ significantly (p-value = 0.315). The tensile tests indicated that printing in vertical and horizontal orientations had no significant influence on mechanical properties. There were no significant differences in mechanical strength between top/bottom printed samples in five different lateral positions. Reliability of printing with good mechanical properties could be a step forward to manufacturing patient-specific implants.Keywords
This publication has 51 references indexed in Scilit:
- Manufacture and thermal deformation analysis of semicrystalline polymer polyether ether ketone by 3D printingMaterials Research Innovations, 2014
- Metal Additive Manufacturing: A ReviewJournal of Materials Engineering and Performance, 2014
- Additive manufacturing: technology, applications and research needsFrontiers of Mechanical Engineering, 2013
- Suitability of PLA/TCP for fused deposition modelingRapid Prototyping Journal, 2012
- A review on stereolithography and its applications in biomedical engineeringBiomaterials, 2010
- Effect of processing conditions on the bonding quality of FDM polymer filamentsRapid Prototyping Journal, 2008
- Three-dimensional finite element analysis simulations of the fused deposition modelling processProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2006
- Lasers and materials in selective laser sinteringAssembly Automation, 2003
- Material properties and fabrication parameters in selective laser sintering processRapid Prototyping Journal, 1997
- Potential of polyetheretherketone (PEEK) and carbon-fibre-reinforced PEEK in medical applicationsJournal of Materials Science Letters, 1987